Where to get a 2x 2.1 amp usb socket

[ozscott]

Hi all. Looking for Narva style 2 usb socket I can mount and wire in...but need both ports to be 2.1 amp min for iPad charging. I dont want the Belkin plug in style.

Cheers

[Homestar]

Do you need to charge 2 iPads at once? I know you can get a twin port unit that has a 2.1 amp port and a 1 amp port but never seen a twin 2.1 amp unit - I wouldn't mind one myself if you find one.

[jwb]

In our vehicle 2 iPads being on charge is common. I've got this stuck to the rear of the center console. 2 x 2.4A + 3 x 1A outputs.
No arguments since I got it.
Orico MPU-5S-BK 5 Ports USB Car Charger from MSY.


https://www.aulro.com/afvb/images/imported/2016/04/760.jpg

[p38arover]

Not exactly what you want but I just bought one of these for the L322.

See eBay item no. 131459673783


https://www.aulro.com/afvb/images/imported/2016/04/758.jpg

[loanrangie]

What about one or even 2 of these -

CAR Truck Boat Accessory 12V 24V Dual USB Charger Power Adapter Outlet K69A | eBay (http://www.ebay.com.au/itm/121623532524?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT)

[ozscott]

P38A if i could get that with twin hi amp ports im in.

Cheers

[Don 130]

What about two of these.
Free Shipping Waterproof Dual USB Charger Socket Outlet 3.1 amp Panel Mount Motorcycle ME3L-in Decals & Stickers from Automobiles & Motorcycles on Aliexpress.com | Alibaba Group (http://www.aliexpress.com/item/Free-Shipping-Waterproof-Dual-USB-Charger-Socket-Outlet-3-1-amp-Panel-Mount-Motorcycle-ME3L/32482239070.html'spm=2114.01010208.3.1.0jUMK9&ws_ab_test=searchweb201556_2,searchweb201602_1_100 17_10005_10006_10034_10021_507_10022_10020_10018_1 0019,searchweb201603_6&btsid=123c7314-0b5f-4996-b2a4-92907833dd16)

Don

[digger]

I suggest try this?

http://www.aliexpress.com/item-img/1-piece-Micro-USB-Car-Charger-Adapter-with-1-USB-Out-Port-For-iPhone-4-5/2034082514.html'spm=2114.10010108.1000017.1.4dEXyg]adapter 12v Picture - More Detailed Picture about Quality Super 3 USB 5V 6.3A USB Car Charger Adapter For iPhone / SamSung S6 S5 S4 S3 Note 4 3 / all mobile phone / Pad / Car DVR Picture in Car Charger from BestBuyStore | Aliexpress.com | Alibaba Gro


adapter 12v Picture - More Detailed Picture about Quality Super 3 USB 5V 6.3A USB Car Charger Adapter For iPhone / SamSung S6 S5 S4 S3 Note 4 3 / all mobile phone / Pad / Car DVR Picture in Car Charger from BestBuyStore | Aliexpress.com | Alibaba Gro (http://www.aliexpress.com/item-img/1-piece-Micro-USB-Car-Charger-Adapter-with-1-USB-Out-Port-For-iPhone-4-5/2034082514.html'spm=2114.10010108.1000017.1.4dEXyg )



adapter 12v Picture - More Detailed Picture about Quality Super 3 USB 5V 6.3A USB Car Charger Adapter For iPhone / SamSung S6 S5 S4 S3 Note 4 3 / all mobile phone / Pad / Car DVR Picture in Car Charger from BestBuyStore | Aliexpress.com | Alibaba Gro (http://www.aliexpress.com/item-img/1-piece-Micro-USB-Car-Charger-Adapter-with-1-USB-Out-Port-For-iPhone-4-5/2034082514.html'spm=2114.10010108.1000017.1.4dEXyg )



Hope that link works,
These may get you by until they can find fittings

[ozscott]

Thanks gents. It's odd that 2 X 2.1 or greater amps cannot be had in the same socket. I might use the little 2 socket jobbie from Ali and recess it into the console somewhere and put one in the back.

Cheers

[turps]

I just use a double USB ciggie plug. Gives me 2 x 2.4amp usb points. Will charge both an iphone and iPad with bothing running GPS apps and recording track.
Pretty sure its this one. And the lightning lead works fine.
|Belkin Dual Car Charger with Lightning to USB cable - Apple (AU) (http://www.apple.com/au/shop/product/HJ3M2ZM/A/belkin-dual-car-charger-with-lightning-cable?fnode=91)

[ozscott]

Thanks mate. Yes use a Narva double plug and 2 x 2usb outlet inserts but rough corregations can upset the apple cart. Usb hard wired sockets would be neater and would not prone to stop charging on rough roads.

Cheers

[Tombie]

Scott. I think I have the answer to your wishes...

And a volt meter as well...

Each circuit is 2.1a
https://www.aulro.com/afvb/images/imported/2016/06/185.jpg

https://www.aulro.com/afvb/images/imported/2016/06/186.jpg

[weeds]

Scott. I think I have the answer to your wishes...

And a volt meter as well...

Each circuit is 2.1a
https://www.aulro.com/afvb/images/imported/2016/06/185.jpg

https://www.aulro.com/afvb/images/imported/2016/06/186.jpg



A link by chance??

[Tombie]

Ask and Ye shall receive...
https://www.ebay.com.au/itm/301958991319

[ozscott]

Thanks Tombie! In the meantime I got this https://www.anker.com/products/A2221011

2.4 amp per port

[ozscott]

Which has the fast charge with my s7 and it does charge at warp speed. It sits nicely in the D2 and rests on the console. Probably still rattle out on corrugated roads but at least the red strip will go out and I should notice it. I didn't look into it much but there seems to be more to taking advantage of the s7 fast charge circuits than just amps. It's a heavy unit with alloy frame.

Cheers

[Surrufus]

https://www.bluesea.com/products/1039/Fast_Charge_-_Dual_USB_Charger_Switch_Mount

[Tombie]

That would nest nicely into a Carling set up as well

[Avion8]

This is the one I'm going to use in the Defender: CAR Cigarette Lighter CUP Holder Power Adapter Spliter USB Charger Socket 2 1A | eBay (http://www.ebay.com.au/itm/162074970557)
but with the cigarette plug swapped for an Anderson plug, as I now have a remote Anderson plug mounted beside the pax seat, so I can run my compressor, fridge, UHF, or anything else I can attach an Anderson plug to.

[Surrufus]

This is the one I'm going to use in the Defender: CAR Cigarette Lighter CUP Holder Power Adapter Spliter USB Charger Socket 2 1A | eBay (http://www.ebay.com.au/itm/162074970557)
but with the cigarette plug swapped for an Anderson plug, as I now have a remote Anderson plug mounted beside the pax seat, so I can run my compressor, fridge, UHF, or anything else I can attach an Anderson plug to.

Your're chasing a 100% reversible install if I recall correctly!

It's too large for my liking. I prefer the panel mount stuff for its "discreet" size.

With technology, I can't imagine why its so damn big, or maybe it's just so it fills the cup holder :p

[Avion8]

Your're chasing a 100% reversible install if I recall correctly!

It's too large for my liking. I prefer the panel mount stuff for its "discreet" size.

With technology, I can't imagine why its so damn big, or maybe it's just so it fills the cup holder :p

That is correct Michael, I am going for the 100% reversible. It will actually live in the back behind the front Pax seat mounted in an as yet to be made false floor. I'm also looking at a Drifta Car Back kitchen to live under this false floor which will also be the outside kitchen for our soon to arrive caravan!

Agree with you on the panel mount stuff if it's a permanent install.
Cheers Nigel

[Toxic_Avenger]

Carling Technologies make a dual 3.15A charger in their common 'rocker switch' footprint.
IP64 too!

https://www.youtube.com/watch?v=_oH1-z9D5z4&feature=youtu.be

http://www.carlingtech.com/sites/default/files/documents/V-Charger_datasheet.pdf

Skookum as!

[Pedro_The_Swift]

yeeeeees,,,
but where does it fit?
the wider switches around the binnacle would be about the same size but the usb cord would be directly behind your knuckles,
the switch block left of the ashtray would be ideal but the switches are much smaller,,, :(

[Tombie]

Carling Technologies make a dual 3.15A charger in their common 'rocker switch' footprint.

IP64 too!



https://www.youtube.com/watch?v=_oH1-z9D5z4&feature=youtu.be



http://www.carlingtech.com/sites/default/files/documents/V-Charger_datasheet.pdf



Skookum as!



Only 3.1A though Knackers!!!

[Tombie]

yeeeeees,,,
but where does it fit?
the wider switches around the binnacle would be about the same size but the usb cord would be directly behind your knuckles,
the switch block left of the ashtray would be ideal but the switches are much smaller,,, :(



Got heated seats?

[Toxic_Avenger]

Only 3.1A though Knackers!!!

Maybe some of the defender drivers amongst us will sacrifice a few amps for the IP64 rating. Because you may want to charge you phone inside the car while its raining. :angel:

[turps]

I just wish I could find a single wire in USB. Dosent need to be high power.
As I have already mounted 3 switches above the mirror. But if I could just tuck a USB in that cavity. So can feed a short USB to power a dash cam.

[digger]

might not be exactly what you were after, but maybe you can fit this one in?


6 Gang Aluminium Switch Panel Circuitblue LED Rocker Breaker Car RV Boat Marine | eBay (http://www.ebay.com/itm/6-GANG-Aluminium-SWITCH-PANEL-CIRCUITBLUE-LED-ROCKER-BREAKER-CAR-RV-BOAT-MARINE-/201654344061?fits=Make%3ALand+Rover%7CModel%3ADefe nder+110&hash=item2ef389197d:g:~5kAAOSw9NdXwCNR&vxp=mtr)

:twisted: sorry!!

[Tombie]

I just wish I could find a single wire in USB. Dosent need to be high power.
As I have already mounted 3 switches above the mirror. But if I could just tuck a USB in that cavity. So can feed a short USB to power a dash cam.



Something like this?

https://www.aulro.com/afvb/images/imported/2016/09/1150.jpg

[turps]

That would work. Good find. It's hard to find some of the random ideas I have in my head.