PDA

View Full Version : 1/2 Ton , aka Lightweights



goingbush
21st April 2016, 07:43 AM
Having recently got bitten by the series LandRover bug again, this time in the form of a Lightweight, Ive been doing mucho research (googling) into them & came across this picture on pintrest

Its appears to be in Outback Australia somewhere, especially having the carsales.com.au logo its got to be local.

anyone know this vehicle,

https://www.aulro.com/afvb/images/imported/2016/04/328.jpg


This one below is mine, was FFR but converted to 12v by a prev owner, Im toying with the idea of getting one of those Clansman antenna wing boxes for it.

https://www.aulro.com/afvb/images/imported/2016/04/318.jpg

Lotz-A-Landies
21st April 2016, 09:23 AM
These are Carzee's images of Phil H's SIII lightweight.

https://www.aulro.com/afvb/images/imported/2016/04/319.jpg

https://www.aulro.com/afvb/images/imported/2016/04/320.jpg

Image source AAVA Camden Park House Weekend 2014 (http://camerajuice.com/AAVA-CPH-2014/) (C) 2014 Ross Carswell

Or Paul Britton's image of the same vehicle from Lithgow Ironfest 2015

http://remlr.com/forum/index.php?action=dlattach;topic=3185.0;attach=1143 7;image

Image source http://remlr.com/forum/index.php'topic=3185.0 (C) 2015 Paul Britton

Nice vehicle isn't it? :)

Lotz-A-Landies
21st April 2016, 09:43 AM
Having recently got bitten by the series LandRover bug again, this time in the form of a Lightweight, ...<snip>

This one below is mine, was FFR but converted to 12v by a prev owner, Im toying with the idea of getting one of those Clansman antenna wing boxes for it.

https://www.aulro.com/afvb/images/imported/2016/04/318.jpgDo you know that you can get Clansman 12V distribution boxes to power up the Clansman PRC-351/352 and PRC-320 sets.

You only need the 24V system to run the large form-factor 321, 353 and intercom harness.