View Full Version : Glind shower install Td5 Defender
landy
19th June 2016, 11:34 AM
Hello all,
I'm about to install a glind shower system into my Td5 Defender (thanks Worene) and was hoping someone could post up some photos of the component positions. 
I've done an AULRO search and although I get a few hits I don't get any pictures. 
Thanks all.
Dopey
19th June 2016, 12:02 PM
Pics in post number 17 in the thread below.
http://www.aulro.com/afvb/general-chat/71977-glind-hot-water.html
I was thinking of putting one in my TDCi 2.2 but decided against it.
There is much less room under the bonnet of a 2.2 than a Td5 for fitting extra stuff.
Mike.
Slunnie
19th June 2016, 01:28 PM
Do they work with a Td5?
I was under the impression that the Td5 doesnt make enough heat???
Could be wrong.
Tombie
19th June 2016, 01:32 PM
Correct Slunnie. It won't get up to temp idling..
Would have to be driven for 5-15min before using.
Blknight.aus
19th June 2016, 03:11 PM
Correct Slunnie. It won't get up to temp idling..
Would have to be driven for 5-15min before using.
I wish Id taken pictures of the setup in the defender that had it in but some clever cookie on a camping trip had put in one of the flexible wash bags in for the wiper wash water and converted the space used by the existing washer water bottle for a hot water tank, it heated off of a glind type shower unit by convection..
It was around the time I did the EGR blank on big red and I was going to plagerise the idea and use the EGR cooler to do the same thing.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.