PDA

View Full Version : Day Running Light


fourteen8
2nd July 2016, 03:16 PM
Play around with nanocom and tried the day running light setting. It works when I set it to NO HEAD.

Whats the different between NO HEAD and NO MAIN?

Thanks
Graeme
2nd July 2016, 05:45 PM
No headlights (headlights off) compared with not on high (main) beam.
pop058
2nd July 2016, 05:57 PM
IIRC, DRLs and headlights (high or low beam) are not supposed to be on at the same time. One or tother.
schuy1
2nd July 2016, 07:55 PM
DRLs by law activate with the ignition and extinguish when the headlight switch is activated.
leond
2nd July 2016, 10:26 PM
Play around with nanocom and tried the day running light setting. It works when I set it to NO HEAD.

Whats the different between NO HEAD and NO MAIN?

Thanks

I have a 2000 Discovery 2, TD5 and a Nanocom. Would be interested to know where/how you have integrated DRL into your existing wiring loom.
Cheers,
Leon
fourteen8
3rd July 2016, 05:10 AM
Hi Leon

I didnt do anything on the wiring. It must have been setup before.

All I did was enabling the DRL using nanocom. I remember there was a thread here on how to setup DRL. I think you need to link something the driver fusebox.
Outback 1
3rd July 2016, 07:33 AM
You don't need to link anything in the fuse box all d2s have the capability it just needs to be turned on in the bcu

Sent from my SM-G900I using AULRO mobile app
Pippin
7th July 2016, 11:32 AM
Hi Leon

I didnt do anything on the wiring. It must have been setup before.

All I did was enabling the DRL using nanocom. I remember there was a thread here on how to setup DRL. I think you need to link something the driver fusebox.

I have set mine to be enabled but all I get is a rapid flashing of the headlights and a corresponding clicking noise. As mine is an early D2 maybe there is a link one has to make in the fuse box. Can anyone enlighten me on this as a search does not bring up the relevant thread.
twr7cx
7th July 2016, 12:29 PM
I seem to recall playing with this on the D2a a few years ago and couldn't get it to work.
Outback 1
7th July 2016, 02:07 PM
I have set mine to be enabled but all I get is a rapid flashing of the headlights and a corresponding clicking noise. As mine is an early D2 maybe there is a link one has to make in the fuse box. Can anyone enlighten me on this as a search does not bring up the relevant thread.

Soundslike a dodgy relay possibly

Sent from my SM-G900I using AULRO mobile app