TD5 NANOCOM.....cannot figure out connection

[weeds]

Received my nanocom on Friday, registered and downloaded code without issue......

Problem I have is working out how to connect the nanocom to the car....

This is the connector on the nanocom, blue one
https://www.aulro.com/afvb/images/imported/2016/07/450.jpg

I found this connector behind the fuse cover
https://www.aulro.com/afvb/images/imported/2016/07/451.jpg

And found this connector next to the ECU
https://www.aulro.com/afvb/images/imported/2016/07/452.jpg

I cannot find any other plug that remotely look like the connection supplied.

Any help would be appreciated.

[Tombie]

Under the front of your cubby box

[Tombie]

https://www.aulro.com/afvb/images/imported/2016/07/449.jpg

[weeds]

LOL.......fair dinkum. I actually found it about three seconds after posting as I thought I best have a look at the battery compartment as I hadn't opened it since purchasing....and what do you know.....there is a plug.

Wouldn't it be sensible to have it next to the ECU.......grrrr

[weeds]

Hang on mine is in the battery box pointing up......getting full of dust.

Tombie, should it be fitted to the front of the seat box so it can be accessed easily without getting into the battery box??

[Tombie]

Yes. That's the factory position. Under the passenger side corner of the cubby.

[Tombie]

https://www.aulro.com/afvb/images/imported/2016/07/433.jpg

[weeds]

https://www.aulro.com/afvb/images/imported/2016/07/433.jpg

cool, i might look at re-locating.....there are no factory holes therefore I'm assuming this configuration was order with the connection in the battery box.