Extra roll pin

[B.S.F.]

I replaced the 1/8" roll pin (red arrow) with a 3/16 pin ,and installed an additional 3/16" pin (yellow arrow) because the Railko pin was too loose in the steering lever.It's supposed to be a press fit. Anybody see any problems with that.
.W.

[mudmouse]

Nup.

Just put back together the top half (shifting bit) of an Isuzu gearbox and they did the same thing on the shift forks - jut had the split section of the roll pins opposing each other....I guess to maintain tension

[B.S.F.]

I replaced the 1/8" roll pin (red arrow) with a 3/16 pin ,and installed an additional 3/16" pin (yellow arrow) because the Railko pin was too loose in the steering lever.It's supposed to be a press fit. Anybody see any problems with that.
.W.

I take this as a resounding no. Too late now, it's all back together again.
.W.