Front wheel stud

[david7307]

Can you replace a wheel stud on the front wheel of a disco 2 diesel :wasntme: , some forums say you cant, others say yes by using a spare part from a range rover,
and if you can how hard is it to do
thanks

[stevo]

Yes you can, brake caliper and rotor have to come off and from memory the wheel hub too four bolts at rear plus the big nut holding the shaft to the hub.

I have replaced a couple on the front a few years ago I was lucky and had a spare hub that the bearings were stuffed on and had kept it for some reason.

[david7307]

Thanks for info