Radial engined Plymouth,,,,

[Pedro_The_Swift]

Very nice,,
not sure about the final starting solution at 23.30,,
:eek:

Leno rides in a Plymouth salt flat racer with a junkyard plane engine - Autoblog (http://www.autoblog.com/2016/08/29/jay-leno-garage-airplane-engine-plymouth-truck-video/)

[isuzurover]

See your Plymouth and raise you:

Radial engined gogomobil:
Awesome, Defined: The 10-Liter, Radial-Engined Goggomobil (http://jalopnik.com/5302246/awesome-defined-the-10-liter-radial-engined-goggomobil)

[JDNSW]

Wrong adjective - should be ludicrous, not awesome.

Also be very interesting to know exactly how he plans to cool it - those engines need proper cowling and a very well planned airflow if used at more than idling speed. As shown there would be very little cooling at all for the lower cylinders.

John

[isuzurover]

Wrong adjective - should be ludicrous, not awesome.

Also be very interesting to know exactly how he plans to cool it - those engines need proper cowling and a very well planned airflow if used at more than idling speed. As shown there would be very little cooling at all for the lower cylinders.

John

This shows him driving it around on the street - fast forward to 9:00
https://www.youtube.com/watch?v=7t2M6fwsvzs

There doesn't seem a lot of cooling for the bottom of the motor.

[loanrangie]

I wish i could find a pic or video but guys my dad knows fitted a 14ltr Hispano-Suiza WW1 fighter plane engine into a 1914 Delage, 1000hp at the rear wheels with only rear wheel brakes.

[incisor]

well that kept amused for a while!

thanks....

[JDNSW]

I wish i could find a pic or video but guys my dad knows fitted a 14ltr Hispano-Suiza WW1 fighter plane engine into a 1914 Delage, 1000hp at the rear wheels with only rear wheel brakes.

As far as i can find, no H-S (or any other manufacturer) WW1 engine came anywhere near 1000hp - and I know of no piston aeroplane engine that ever came anywhere near that from 14l!

If it was a WW1 engine, 14l is quite feasible, but would have been under 200hp - quite enough for a 1914 Delage!

(for contemporary speeds with vehicles at that time, a more or less standard Stanley with a streamlined body and high ratio final drive was timed two ways at 120mph over a measured mile in 1908 from memory - and a further run was timed one way at 190mph before the accident. With two wheel brakes.)

John

[loanrangie]

As far as i can find, no H-S (or any other manufacturer) WW1 engine came anywhere near 1000hp - and I know of no piston aeroplane engine that ever came anywhere near that from 14l!

If it was a WW1 engine, 14l is quite feasible, but would have been under 200hp - quite enough for a 1914 Delage!

(for contemporary speeds with vehicles at that time, a more or less standard Stanley with a streamlined body and high ratio final drive was timed two ways at 120mph over a measured mile in 1908 from memory - and a further run was timed one way at 190mph before the accident. With two wheel brakes.)

John

Not factory john ,built pretty much from scratch and squeezed into a car chassis.

Sent from my K4000_PRO using AULRO mobile app