ACE Disabling

[pastr]

hello
I'm trying to disable the ACE with NANOCOM.
I'm doing this procedure:
Valeo BCU -> Settings -> ACE -> change from Yes to NO.
after I'm doing the task and taking the nanocom out and then connecting the nanocom back, I'm finding the ACE in YES position.
so it's seems like the ACE is working again.
that happend every time, like there is a "SAVE" missing.
Is it a problem?
what to do?

[sierrafery]

If you converted to classic arb's and put an idler instead of the pump the setting doesnt matter too much as long as the ACE warning is not on after the self check so if no warning just don't bother with it...simple as that:cool: ... eventually ugrade your nanocom to the last firmware option which is an improved version to have better coverage for ACE too cos otherwise nanocom in the ACE artea is almost useless

[RobMichelle]

After you change to yes, I think you scroll to last page and tap on "write to" maybe.i had same sort of problem with alarm until I tapped the "write" button then it stayed as I needed.

[Nomad9]

Hi Rob,
Thats the way it is using the Faultmate, same company. Cheers Marty