CT 18 dilution

[landoman]

Quote:
Originally Posted by Vinnie View Post
I use CT-18 truck wash and find it to be very good. I use it on my Disco, paintwork and under body and it doesn't harm it. Best method I find is to use a 5 litre or similar size pressure sprayer and spray it everywhere underneath. Leave it overnight and then spray it off with a Gernie or similar. Any brand of truck wash would most likely be the same (like the one already mentioned). I get my CT-18 at Autobarn.

Good luck

Chris.
Want to wash the underside of my truck .......bought some CT 18 .......want to spray it with a pressure garden sprayer on and leave it over night then gurney as suggested ........but it looks like pretty thick stuff so looks like I need to dilute it .............any suggestion on what dilution to be able to spray it but that will still work ......
Edit/Delete Message Reply With Quote Multi-Quote This Message Quick reply to this message

[Tombie]

CT-18 is a great cleaner...

Dilute as per instruction on bottle.

Keep in mind:
- it strips wax as well
- it strips the rust coatings in your door panels etc.

So use sparingly, and rinse well.. and then Wax the vehicle and keep the door treatments etc up..

[landoman]

CT-18 is a great cleaner...

Dilute as per instruction on bottle.

Keep in mind:
- it strips wax as well
- it strips the rust coatings in your door panels etc.

So use sparingly, and rinse well.. and then Wax the vehicle and keep the door treatments etc up..

Thanks for that ........what are the door treatments

[Tombie]

Either fish oil or lanolin are good for treating door frames, chassis etc against rust

[landoman]

Thanks for that .....I spray the chassis with inbox Lanox ....so after washing tith the CT 18 I'll respray it .....as for the door frames .....to treat do you have to remove the paneling

[Tombie]

Up through the drain holes works well