View Full Version : Ignition Sw Kaput
tdi130dualcab
18th November 2005, 02:13 PM
Three times yesterday my 130 stalled on me. I knew I was low on fuel, but didn't think I was that low.
Worked out it was the ignition sw playing up. Have just ordered one so next week I will have the fun job of removing the dash and trying to install a new switch!
loanrangie
18th November 2005, 03:10 PM
Isnt it in the column ? It will just unplug but you will probably need to grind the bolts out as they usually have the security bolts that the heads shear off when tightened up. Or use a hacksaw blade and cut a slit just big enough to use a flat blade screwdriver to undo.
BRINDO75
18th November 2005, 03:11 PM
when you do remember there is 2 screws on opposite sides , i got very frustrated cos i couldnt find it but its there. have fun .
BRINDO75
18th November 2005, 03:14 PM
yes but on a defender its through the dash and it just sits in the back of the ignition barrel with 2 screws.
tdi130dualcab
18th November 2005, 04:13 PM
You go in through the dash to access it. The Barrel assy stays in place, and the switch is held in the back of it. I have already had to remove it to bodgy it up to get going this afternoon.
Ordered a new sw assy $66. Should be here monday.
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.