PDA

View Full Version : Rear step with tow bar



weeds
17th October 2016, 05:21 PM
Has anybody sorted a solution to refit the rear step after tow bar is fitted??

Tombie
17th October 2016, 06:16 PM
Which tow bar?

weeds
17th October 2016, 06:53 PM
Hayman Reece type......

ozrob
17th October 2016, 07:03 PM
I have no problem in fitting the rear step with a Hayman Reece towbar.
The threaded holes in the rear chassis cross-member are fully accessible.

weeds
17th October 2016, 07:06 PM
I have no problem in fitting the rear step with a Hayman Reece towbar.
The threaded holes in the rear chassis cross-member are fully accessible.



Well there you go....thanks.

Although I seem to only have one thread/captive nut in the chassis....the other (other) was a bolt that I had to cut off.

Will look at re-fitting after the bar is fitted.

LR V8
17th October 2016, 07:10 PM
Hi weeds, do you have a photo of your tow bar handy ? I assume it's the horizontal support bar type ... about a foot & 1/2 wide ?

My 2013 Defender rear step has no issues with my HR tow bar, but it has a support bar tapered forward to the chassis rails.

Cheers,

Pete

TheGrumpy
17th October 2016, 09:46 PM
Here's a pic of the HR I fitted earlier this year. No problem with the step but won't work with a long range fuel tank I think.

weeds
18th October 2016, 05:22 AM
Thanks......that bar looks different to the one I had fitted to my old defender, I always thought it was a hayman Reece.....

Tombie
18th October 2016, 08:15 AM
So there was a couple of different ones...

The one in the pic posted by the OP is not compatible with a Long Range tank. But allows the step.

Then there is a square tube version which allows the tank but inhibits the step being refitted.
https://www.aulro.com/afvb/images/imported/2016/10/387.jpg

weeds
18th October 2016, 11:10 AM
So there was a couple of different ones...

The one in the pic is not compatible with a Long Range tank. But allows the step.

Then there is a square tube version which allows the tank but inhibits the step being refitted.
https://www.aulro.com/afvb/images/imported/2016/10/387.jpg



Umm, that's looks similar to my old one and I have a long range tank fitted.

Tombie
18th October 2016, 11:32 AM
Umm, that's looks similar to my old one and I have a long range tank fitted.



Exactly - I had to remove the curved version and fit this to put the Tank in..

DiscoMick
20th October 2016, 12:40 PM
Mine has a Long Ranger tank and a HR bar and they fit no problems.
I suppose the size of the tank might affect it.

Tombie
20th October 2016, 12:58 PM
Perhaps a different brand LR tank?

DiscoMick
20th October 2016, 01:04 PM
Perhaps a different brand LR tank?

Long Range, Long Ranger or others?

Sent from my SM-G900I using AULRO mobile app

Tombie
20th October 2016, 02:13 PM
Mine was a Long Ranger and had to change to the Square tube Hitch as the curved tube Hitch interfered..

DiscoMick
20th October 2016, 05:23 PM
Ok. My hitch is also square tube.

Sent from my SM-G900I using AULRO mobile app

weeds
20th October 2016, 07:41 PM
Thinking cap on.......now that the car is home to work a solution