How to Change Top hose for 2011 D4 TDV6 2.7

[Discodougie]

I have a split top hose (pnh500025) and need to replace. Can anyone give me some tips on the easiest method to do this. TIA.:)

[Tombie]

Bonnet up - undo top clamp.
Steering turned hard right.
Pop scrivets from plastic protector at front of wheel arch (chassis rail)
Undo bottom clamp.

You should have it from there.

[LandyAndy]

Incase you don't know,you can buy an electronic copy of the workshop manual here.
All goes towards running the website.
ENJOY
https://www.davesitshop.com/emporium/
Andrew

[Ozzy119]

Bonnet up - undo top clamp.
Steering turned hard right.
Pop scrivets from plastic protector at front of wheel arch (chassis rail)
Undo bottom clamp.

You should have it from there.

As above and from my own experience take care pulling the plastic body clips from the wheel arch. Otherwise you'll be using cable ties and its a fiddly job.

You might see oil on the turbo end, to be expected apparently.

safety first - off road height and chock chassis support, just in case.

[Discodougie]

Thanks Ozzie. A bit late. I retrieved one of the four.
Cheers