Draft Vehicle Standard Bulletin for Public Comment

[MickG]

Draft National Code of Practice for Light Vehicle Construction and Modification (NCOP)

http://www.dotars.gov.au/transreg/vsb/PDF/...019sept2005.pdf (http://www.dotars.gov.au/transreg/vsb/PDF/NCOP11%20Section%20LS%20Suspension%20and%20steerin g%2019sept2005.pdf)

[brooksy]

Very interesting Mick.
I think the only area I am outside the legal boundaries is the tyre size being greater than 50mm from standard !!!

brooksy

[Steinzy]

Very nice - must print a copy and keep it in the car to give to the police when they pull me over and question about tyre size and Mods - I can hand them some light reading material and see what they say style_emoticons/<#EMO_DIR#>/laugh.gif

[MickG]

Originally posted by brooksy
Very interesting Mick.
I think the only area I am outside the legal boundaries is the tyre size being greater than 50mm from standard !!!

brooksy

I am the same Brooksey. If I am running 265/75R16 (31.64" to be precise) am I right in assuming that I am 65mm above standard - if standard is 255/65R16 (29.05") from memory?

Aye, Mick

P.S. How was Fraser?

[Steinzy]

Me to with the Tyre size - standard is 255/65/R16's and I had 265/75/R16's fitted by Nerang Tyre Service they said that even if i got pulled over they doubt very much if I would get a defect notice for them.

[brooksy]

Originally posted by MickG+--><div class='quotetop'>QUOTE(MickG)</div><div class='quotemain'><!--QuoteBegin-brooksy
Very interesting Mick.
I think the only area I am outside the legal boundaries is the tyre size being greater than 50mm from standard !!!

brooksy

I am the same Brooksey. If I am running 265/75R16 (31.64" to be precise) am I right in assuming that I am 65mm above standard - if standard is 255/65R16 (29.05") from memory?

Aye, Mick

P.S. How was Fraser?[/b][/quote]

That's right Mick, by that you are illegal !!! Stupid isn't it.

Fraser was great, have alook at my pics in topic under this one in GCLRO General style_emoticons/<#EMO_DIR#>/biggrin.gif

brooksy

[harry]

does anyone have the current specs for this tyre size problem,
I knew I was out a bit on the disco, but would now like to know what I can run on a s2a.

[djhampson]

http://www.aulro.com/afvb/gclro-club-only-discussions/162461-tyres-up-2-bigger-now-allowed-qld.html


This is what I used when I got my BFGs

[CheekyD1]

75mm total increase in height - spring and tire combined
Note under QCOP lift does not include Body Lift ????


http://www.tmr.qld.gov.au/~/media/Safety/Vehicle%20standards%20and%20modifications/Vehicle%20standards/Vehicle%20standards%20instructions/dec12/vsil17.pdf