Sliders for Rangie / Disco

[LRHybrid100]

G'day Guys,

DiscoWhite made me some rock sliders a couple of weeks ago, just like his. They have been into the pain shop and sat in my car until Scotty could install them (cannot lift at the moment with my neck).

They are VERY well made and fit perfectly

http://www.aulro.com/albums/album362/Sliders_1.sized.jpg

http://www.aulro.com/albums/album362/Sliders_2.sized.jpg

http://www.aulro.com/albums/album362/Sliders_3.sized.jpg

http://www.aulro.com/albums/album362/Sliders_4.sized.jpg

They bolt through the sills and pop rivet on the underside of the sill

http://www.aulro.com/albums/album362/Sliders_5.sized.jpg

[Maggot4x4]

They look great.

[LandyAndy]

Nice Job 8) 8) 8)
Andrew

[hiline]

they look the goods mate https://www.aulro.com/afvb/ https://www.aulro.com/afvb/

but its a pity discowhite lives in NSW or i'd be knocking his door down,where's mine https://www.aulro.com/afvb/ https://www.aulro.com/afvb/ :wink: :wink: :wink:

[Andrewpv01]

They look great. I wonder if he would like to make some more? https://www.aulro.com/afvb/

Andrew

[p38arover]

They look the bee's knees.


Originally posted by LRHybrid100
(cannot lift at the moment with my neck).

You shouldn't be lifting with your neck!

Ron

[discowhite]

i forgot to tell ya that thoes little bits of weld under the pipe are
the hi lift jack, to stop it slipping.(hope the painter didnt grind them off?)

all these little things i noticed when i built mine i fixed on yours.
and they fit neater than mine :roll:

how many noises were there to jack it up that high??
i was only game to do a corner at a time.

phil

[LRHybrid100]

Originally posted by discowhite
i forgot to tell ya that thoes little bits of weld under the pipe are
the hi lift jack, to stop it slipping.(hope the painter didnt grind them off?)

all these little things i noticed when i built mine i fixed on yours.
and they fit neater than mine :roll:

how many noises were there to jack it up that high??
i was only game to do a corner at a time.

phil

yeah we noticed the notches of weld under the tubes and thought the same.

you know Scotty, he likes to test everything to possible destruction - there was no noises as he lifted it, should there be https://www.aulro.com/afvb/

[DEFENDERZOOK]

<span style="color:blue">is discowhite selling these....

i wouldnt mind a set for the fender.....</span>

[D110V8D]

The pig wants some for christmas! https://www.aulro.com/afvb/ 8)

She squealed with delight when she saw 'em. :wink: https://www.aulro.com/afvb/ https://www.aulro.com/afvb/

[sclarke]

They look great.

i punished mine on the weekend and am very happy with them, except the paint loss.....

[DEFENDERZOOK]

<span style="color:green">small price to pay for the damage they prevented.....</span>

[Lucy]

I'd like to see some plans/instructions to build some put up please :wink:

[sclarke]

[quote=DEFENDERZOOK]<span style="color:green">small price to pay for the damage they prevented.....</span>

Zackery

[NOZ]

So are they going into production ??

[RoverOne]

Very nicely done, they'd look great on the Defender.

Cheers
Bryce

[DEFENDERZOOK]

<span style="color:blue">hey discowhite......


there is a strong market here for your sliders......

are we to assume by the silence that the answer is no.......?</span>

[hiline]

yeah i'd pay $100 for a set for my 130 https://www.aulro.com/afvb/ https://www.aulro.com/afvb/ https://www.aulro.com/afvb/ :wink:

[sclarke]

hell id pay $100 also.......

mine cost me over $300 just in materials.......... including paint and stuff and 12 hours to make them

[NOZ]

Would only be fair to let him set a price, if he wants to that is

[Scouse]

Originally posted by NOZ
Would only be fair to let him set a price, if he wants to that isNah.......betcha he makes them at work :wink: .

How about Discowhites actual cost + 5% https://www.aulro.com/afvb/ https://www.aulro.com/afvb/.

[NOZ]

Going by the silence of his response they are going to cost us nothing 8O

[amtravic1]

I would also be interested in a set. Had a look at some others today from a poular retailer in Vic and they did not look anywhere near as good.

Ian

[discowhite]

if i started to make all these sets at work i would be out of a job!
one or two here and there no probs but at last count
its more like 10 sets and a few defender ones and a set for an
S2 disco. i only have measurements for S1 disco and classic rangie
atmo.

if only i was in brissy with my shed and fab equipment ide
go into production. :cry:

but hate to say it but, sorry fellas.
i might do a set here and there.

<div class='quotetop'>QUOTE</div><div class='quotemain'>Had a look at some others today from a poular retailer in Vic[/b][/quote]
if these are the round pipe ones then they will bend easy.
if you could ever bend mine you'de be needing a new car!
thats why they are $475 a set.

phil.

[NOZ]

maybe you could tell us how to make them Eg: type of metal and so on

[NOZ]

maybe you could tell us how to make them Eg: type of metal and so on or a diagram sort of plan.

I dont know maybe a silly thought :oops:

[discowhite]

50x50x5RHS
75x50x5angle
28mm NB blk pipe
28mm NB 90 elbows
6x 3/8unf x 4'' bolts
and handfull of 4mm rivetts
3 bends in the box
and a bit of welding and drilling

theres enough photos on here of my sliders
so grab your self a tape and start measuring!

phil

dont forget that the bottom door line of S1 disco and RRC arnt
parrell to the chassis on the verticle or horizontal.

[DEFENDERZOOK]

Originally posted by discowhite
i only have measurements for S1 disco and classic rangie
atmo.





<span style="color:blue">
hey....do you want me to bring lurch around so you could measure him up.....?</span>

[NOZ]

Thanks for that, I have a mate how works as a coach body builder so I will see if he will make some.

Cheers

[Lucy]

After a trip with Tony, Scouse, XSI and Disco95, some of these would be very useful for next time. Can someone please repost the pictures?

Justin

[Scouse]

After a trip with Tony, Scouse, XSI and Disco95, some of these would be very useful for next time. Can someone please repost the pictures?

JustinWell, I finished mine on the weekend so here's some photos:
(click to enlarge)
http://img244.imageshack.us/img244/9315/mvc001f4vi.th.jpg (http://img244.imageshack.us/my.php?image=mvc001f4vi.jpg)

http://img244.imageshack.us/img244/1272/mvc002f7pn.th.jpg (http://img244.imageshack.us/my.php?image=mvc002f7pn.jpg)

http://img244.imageshack.us/img244/9210/mvc004f0ft.th.jpg (http://img244.imageshack.us/my.php?image=mvc004f0ft.jpg)

http://img244.imageshack.us/img244/8523/mvc006f3mq.th.jpg (http://img244.imageshack.us/my.php?image=mvc006f3mq.jpg)

They're a bit late to save my doors but I can repair them now & hopefully they'll be safe for the future:) .