Plastic tow cover clips (?)

[gofish]

Hi folks. I am after some of those clips that hold the plastic cover in the rear bumper. Anyone know where to purchase them? Thanks.

[LRD414]

The part number is DYR500010.
Lots of options for purchase.
There's even aftermarket ones that don't need the 20c coin.

Cheers,
Scott

[RHS58]

Search eBay.

[Russrobe]

I was just about the order the whole cover... LAND ROVER LR4 / DISCOVERY 4 2010-ON TOW EYE COVER REAR FOR REAR BUMPER | eBay (http://www.ebay.com.au/itm/LAND-ROVER-LR4-DISCOVERY-4-2010-ON-TOW-EYE-COVER-REAR-FOR-REAR-BUMPER-/162055922938?hash=item25bb4924fa:g:Kg0AAOSw1DtXKjY a)

The cheapest clips I can find are still about $15 delivered.
LAND ROVER DISCOVERY 3 4 REAR BUMPER TOW COVER CLIPS TOWING EYE TRIM TURN LOCK | eBay (http://www.ebay.com.au/itm/LAND-ROVER-DISCOVERY-3-4-REAR-BUMPER-TOW-COVER-CLIPS-TOWING-EYE-TRIM-TURN-LOCK-/191030401296?hash=item2c7a4c9910:g:vkgAAOxydlFSzvl 4)

The only ones on there atm that don't need a coin to turn are $40 as $30 for shipping!

[LRD414]

Maybe wait and check with dealer.

[101RRS]

Why stuff around with something so cheap - just go to the dealer and get them there - they break often and are cheap as chips. When I bought my last ones I think they were $4 each and in stock.

[Russrobe]

Hopefully the cover is nice amd cheap too

[BMKal]

The part number is DYR500010.
Lots of options for purchase.
There's even aftermarket ones that don't need the 20c coin.

Cheers,
Scott

Where did you find these Scott. I need to get a new cover and clips in the not too distant future, and was just going to pick them up at the dealer next time I'm down in Perth. Could be interested in a different style of clip though, if it doesn't need a coin or a screwdriver to operate.

[PeterJ]

Have a look at the web site below, the tabs make it easy as to remove/replace the cover, they are cheap enough, but the postage is a killer, a group buy might be an idea.

Thanks to lukeob from the Disco3 site for posting this find. https://www.ebay.co.uk/itm/371718410610

I have actually 3D printed some like this myself so PM me if you are interested.

[brucester]

I have just bought a new cover from the dealers ($28) cheaper than Ebay. Pays to check dealer prices sometimes.

[BMKal]

I have just bought a new cover from the dealers ($28) cheaper than Ebay. Pays to check dealer prices sometimes.

Yep - same price I was quoted last time I was down at the dealers. Unfortunately, they didn't have one in stock at the time, so I didn't get one. Next trip to Perth, I'll ring ahead and make sure they're holding one for me.

But I did order two sets of those clips that don't need the 20c piece or screwdriver last night. Can't get them from the dealer. :D

[Russrobe]

Ah thanks for that, lucky I hadn't ordered it yet. Just called Barbagallo the cover is around $30!. If only their air struts were as cheap...

I have just bought a new cover from the dealers ($28) cheaper than Ebay. Pays to check dealer prices sometimes.

[gofish]

The price of these things is crazy! .....& then after buying them they break anyway :mad: Don't even get me started on the shipping :angrylock: Rant over. I will look around. Thanks for the help.

[Pirate_Pete]

I requested a couple the last time the car was at the dealer for warranty work. Invoiced for 2 (total $7), three were sitting in the cup holder when I collected the car. (Austral Land Rover Brissie).

[Peejaytoo]

Hi, I have a 2015 Disco 4 - I think the clips are the same. A mate of mine actually made some improved version units for his by making them on a 3D printer. His have an end that allows the clips to be removed/installed without a coin or screwdriver.
So if you know anyone with a 3D printer.