What do you put in your perentie boxes?

[dranoweb]

This idea sprang into life when it was suggested that I get a prop shaft/drive shaft socket and carry it with me.

Which is a great idea by the way.

I thought it may be beneficial to share photos of the gear we stuff into those rear boxes on your perentie - the ones that typically house the jack and related tools.

Little things often snowball into big problems, especially if you dont have the right tool - say a 9/16th open end spanner..

So - show us ya' boxes...

I'll start with some less than professional photos:

Sent from my E6653 using AULRO mobile app

[Chris078]

Don't have any photos, but in mine I have
Jack
extendable wheel brace wheel nut remover thingy
2 x wheel chocks
a green woolies bag with
towel (for the knees when changing tyres)
hi vis vest
collection of various load straps
gloves

the other side has
small tool kit
warning triangle
plywood to put under the jack

[dranoweb]

Wheel chocks are probably something I need to add.

Sent from my E6653 using AULRO mobile app

[Chris078]

Wheel chocks are probably something I need to add.

Sent from my E6653 using AULRO mobile app


with how much a Perentie rocks around with the handbrake on due to it's setup, there's no way I would every jack up a Perentie without at least 2 chocks on the other side, I've actually been waiting to get another 2 so I can double chock each wheel instead of just 1 on each.

[dranoweb]

The jack procedure should be listed on the inside of the drivers side box door.

Engage diff lock and low range,
chock furthest wheen from jack,
Engage handbrake.

Sent from my E6653 using AULRO mobile app

[BadCo.]

I have too much stuff to list haha