Changing the turbo hose.

[Ean Austral]

Gday All,


I have a silicon hose set which I have already replaced 2 hose's just need to do the small hose that fits onto the turbo itself. I see you go thru the passenger wheel arch to do the job.

My question is do you need to get new plastic rivets that hold the covers on in the wheel arch ? I seem to be able to break these things without trying but I do have a set of the plastic tools they use to remove them. I know that they wouldn't be available here in Darwin so where have people source these rivets/clips from ?


Thanks and Cheers Ean

[Grentarc]

Gday All,


I have a silicon hose set which I have already replaced 2 hose's just need to do the small hose that fits onto the turbo itself. I see you go thru the passenger wheel arch to do the job.

My question is do you need to get new plastic rivets that hold the covers on in the wheel arch ? I seem to be able to break these things without trying but I do have a set of the plastic tools they use to remove them. I know that they wouldn't be available here in Darwin so where have people source these rivets/clips from ?


Thanks and Cheers Ean
I bought 20 of them from ebay for not much at all - about $8 from an Australian seller

[IvanR]

Part no for clips is ANR2224. Come in a pack of 5 but I don't remember where I sourced them except it was local (Aus).

Ivan

[LandyAndy]

Supercrapp or Repco Ean.
They should have a couple of rotating displays with all that sort of clip on.
Andrew

[Ean Austral]

Thanks for the replies, does anyone have a picture of 1 so I know which sort to get.


I will remove 1 if I have to but thought it was worth asking.


Cheers Ean

[Ean Austral]

I had a look on ebay , can only see 1 seller from UK the rest of the sellers are from china. Surely someone in Australia sells them.


Cheers Ean

[Russrobe]

This should be them, from Ebay

[Ozzy119]

That's definitely the little buggers. I broke all four when I did my hose replacement. It took me longer to cable tie the wheel cover back together than it did the hose repair.

I didn't know they were something so easily replaceable from the supermob group. Will get some now. From memory the landrover ones came in two sections, but those look like they would do the same job.

[Tombie]

The ones pictured are 2 pieces..
Outer and centre pin.

[crawal]

Champion do a range of these , or call into your local panel shop (bigger on) Wurth do a range they sell to panel shops.:)