PDA

View Full Version : Specialist LR repairer in Melbourne's East side?



winaje
3rd January 2006, 02:41 PM
Hi, does anyone know of a specialist LR panel repairer on the East side of Melbourne? Preferably out near Lilydale?

Thanks

Ralph1Malph
8th January 2006, 11:26 AM
Hi
Try RoverLand,
Have used him once and found to be ok, also the prefferred suppliers (I think that is what it is called) section on here has a couple of others.
But.....
I would appreciate any info or goss on a good spanner monkey here on the WEST side of Melb...
Long drive when I need work otherwise

Regards
Ralph

Bytemrk
8th January 2006, 07:01 PM
Winaje,

As Ralph has said - check the preferred suppliers for Vic - you will see we are spoiled in east Melb - there are at least 4 or 5.

BUT I use Roverland https://www.aulro.com/afvb/ https://www.aulro.com/afvb/ - Glen has many years of Landrover specific experience, he doesn't charge like a wounded bull and and he knows what he's on about.

I'm certainly happy with all the work and advise he's given me.

He's located at Factory 1/ 95 Dorset Rd Ferntree Gully ( Just out of Boronia)

Not far from Lilydale - and well worth the drive. Give him a go- you won't regret it.

Cheers, Mark

winaje
8th January 2006, 09:56 PM
Thanks guys... Glen is probably going to be a client of mine shortly, with the web design package I sell...

But as I said, I need a PANEL shop, not a mechanic... 8O

BTW Mark, are you on my group and site? www.d2au.com

Bytemrk
8th January 2006, 10:21 PM
:oops: :oops: :oops:

Best I learn to read the original post..... :oops: :oops:


Hi Will,

Yeh I've lurked around your site for a while.... finally got off my but and set up a user name earlier tonight...

nice site!

Cheers, Mark

hiline
8th January 2006, 11:01 PM
Originally posted by winaje
Thanks guys... Glen is probably going to be a client of mine shortly, with the web design package I sell...

But as I said, I need a PANEL shop, not a mechanic... 8O

BTW Mark, are you on my group and site? www.d2au.com

if you ask Glen he will give you a contact he knows

cheers ray

Ralph1Malph
9th January 2006, 08:29 PM
Bugger,
I didn't read the post proper either :oops:
My first attempt to give quality advice and I muff it :x

Must read the post :wink:
Must read the post :wink:
Must read the post :wink:
Must read the post :wink:
Must read the post :wink:
Must read the post :wink:
Must read the post :wink:
Must read the post :wink:

Regards
Ralph

Bytemrk
9th January 2006, 10:32 PM
Hey Ralph.... maybe we should go and have a beer and leave the technical stuff to others :? :oops: :?

Mark...