PDA

View Full Version : new front oil seal and updated carrier



duderduderini
4th April 2017, 06:03 PM
Hi Guys
I will be doing the cam belts and auxillary belt along with the water pump and oil pump update on my 06
Someone mentioned the oil seals can walk and I read somewhere that there is an updated seal carrier and seal for the 2.7 diesel
Does anyone know the specific part number or is it likely that I will get the updated one anyway
Thanks

101RRS
4th April 2017, 06:31 PM
I thought it came with the new Oil Pump. Any specific reason to replace the water pump?

duderduderini
4th April 2017, 07:03 PM
I thought it came with the new Oil Pump. Any specific reason to replace the water pump?
And I'd rather do it now than have to do it all over again. More preventative than necessary.
I used to wear my seat belt at the drive in!!

Ralasa
7th April 2017, 06:38 AM
i just had a seal come out on the oil pump, the one i put in first was aftermarket , this time put genuine land rover part
, new one does look a lot different has ridges around it , be careful fitting it , its fragile , i found a sockect the exact same size, put the seal on that first then
held it next to the crank and slid it on , , here is a pic of the new one i used , from a site in UK
Front Crank Seal - Genuine Land Rover at www.rimmerbros.co.uk (http://www.rimmerbros.co.uk/Item--i-1102415)