View Full Version : 2016  D4 lift and tyres
Rylee405
8th April 2017, 08:18 PM
Hi has anyone fitted BFG AT K02   275-65-R18 tyres and Johnson rods 2.5 inch lift?
Is there any rubbing?
Thanks
LandyAndy
8th April 2017, 09:15 PM
Getting a bit greedy I think.
If you have an air suspension failure I don't think you will be moving!!!!
Andrew
TuffRR
9th April 2017, 06:56 AM
Not the BFG's, but i run Cooper STT Pro's in that size.  A bit of rubbing on front chassis rail is about all now that the plastic inner guards have been 'massaged' with a heat gun and mallet.  Depending on the type of driving you do these are a very good tyre.  
You do need to have a contingency in case you do have a suspension fault which drops you to bumpstops ie IIDtool, GOE air-up kit, extended bumpstops, etc...
Disco-tastic
9th April 2017, 06:16 PM
If you have an iid tool theres not much need for the rods...
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.