2014 Isuzu D max clutch bleed

[Don 130]

G'day all, I had to remove a section of the clutch line on my daughters D max to weld up a broken bracket. I let the fluid out and now I can't get it to bleed. The pedal goes to the floor with no resistance. Can any suggest a procedure?
Don.

[Don 130]

I got a pump up sprayer from the hardware and some vinyl hose. I was able to 'reverse bleed' it from the slave cylinder, but I've still got no pedal. The pedal has no feel to it at all. Any ideas?
Don.

[Davehoos]

these are very light normally. energetic pumping can deform cups in master cyl. These are supposed to be pressure bled without pumping.

I have often had to push fluid in the slave cyl to get the master to pump holding a bottle high to get some syphon pressure. moving the pedal shuts of the flow.

I assume this is what you meant by reverse bleed with a pressure spray.

lots of modern vehicles have a dampener in the system that may have a bleed screw. not seen any on works Dmax..

[Don 130]

Thanks Dave, I persisted with the reverse bleeding, emptying the reservoir a few times, and eventually it came good, so alls well.
Don