Rhino rack rl210 differences

[Mclaren00]

Hi looking at the 210mm racks but on website there is 3 or 4 versions and for life of me can't figure out what is different about them
Anyone recently bought some and know?

[Fluids]

I think the legs are all the same. The difference is in the bracket/clamp that attaches to the bottom of the leg ... determined by the gutter that the clamp has to be secured against.

RL210 legs will need scalloping the inside edge to follow the roof curvature and you'll probably need 2 x 10mm spacers for the top of each leg to get the cross bars to clear the roof. This is how mine was done.

There's pictures in my gallery.

Message - AULRO Photo Gallery (https://www.aulro.com/app/showgallery.php?cat=1096)

[Mclaren00]

Cheers mate
Picked up a near new set of 3 for $230 bucks so will scallop them and get some of those spacers
Photos are perfect appreciate the tip!!

[Mclaren00]

I think the legs are all the same. The difference is in the bracket/clamp that attaches to the bottom of the leg ... determined by the gutter that the clamp has to be secured against.

RL210 legs will need scalloping the inside edge to follow the roof curvature and you'll probably need 2 x 10mm spacers for the top of each leg to get the cross bars to clear the roof. This is how mine was done.

There's pictures in my gallery.

Message - AULRO Photo Gallery (https://www.aulro.com/app/showgallery.php?cat=1096)

You need to scollop all 6 Hey
Was just looking at the roof

[Fluids]

You need to scollop all 6 Hey
Was just looking at the roof

No, just the 4 x back ones. The front 2 x can be left alone. 2 x spacers won't allow the middle bar to clear the roof rails, don't know if you can see it in the photos, so I just snugged the middle bar up against the rear end of the roof rails. Sits above the c-pillar.