Puma 90 broken clutch return spring!

[Pickles2]

I was just about home from a short trip today, when I heard a "click" from the pedal area, in hindsight, I think I felt it slightly through the pedal, but anyway, when I got home, I noticed a piece of broken spring on the floor, & the spring is not sitting correctly, because it's broken/not clipped in on one side.
Just wondering if anyone else has had this problem, & how difficult it is to replace..looks like a bit of an awkward area, with that matting around it etc?
As I've said before, I'm mechanically hopeless, so ULR will be doing it, Thanks, Pickles.

[billnus]

I was just about home from a short trip today, when I heard a "click" from the pedal area, in hindsight, I think I felt it slightly through the pedal, but anyway, when I got home, I noticed a piece of broken spring on the floor, & the spring is not sitting correctly, because it's broken/not clipped in on one side.
Just wondering if anyone else has had this problem, & how difficult it is to replace..looks like a bit of an awkward area, with that matting around it etc?
As I've said before, I'm mechanically hopeless, so ULR will be doing it, Thanks, Pickles.

A couple of screws and you can undo the metal retainer holding on the matting, then easy peasy. Just put in a new one where the 2 spots are to hook it onto.

[Pickles2]

ULR ordered the spring for me & asked me to come in at lunchtime and they would fit it,...much appreciated as they are absolutely flat out.
Anyway, all done,...a big thank to to ULR for great old fashioned service.
Pickles.

[YOLO110]

You obviously have strong legs mate!

Good to hear about ULR again. :thumbsup: