I Love My Landy!
13th July 2017, 09:43 AM
Good morning all,
The cooling fan in my 39L Engel fridge (Model MRFT - 540D G4 - purchased in year 2000) is growling and due for replacement. The original fan (as far as I know - I don't think it has ever been replaced) is a Jamicon JF0825 S2H. The code stands for the following:
JF - fan type
08 - frame width - 80 mm
25 - frame thickness - 25 mm
S - sleeve bearing
2 - voltage - 24V
H - high speed (3,000 rpm I think)
Overall it puts out 38.39 CFM air flow. Input: 130 mA, 3.12 watts
I have found a direct replacement from Jaycar. Catalogue number YX2542.
80mm 24VDC Thin Ball Bearing Version - 2 Wire | Jaycar Electronics (https://www.jaycar.com.au/80mm-24vdc-thin-ball-bearing-version-2-wire/p/YX2542)
Air volume: 40 CFM
Input: 3.12 watts
Ball bearing
Input current: 130 mA
Size: 80 mm width, 25 mm thickness
Speed: 3200 rpm
It's only $30!
Edward :)
The cooling fan in my 39L Engel fridge (Model MRFT - 540D G4 - purchased in year 2000) is growling and due for replacement. The original fan (as far as I know - I don't think it has ever been replaced) is a Jamicon JF0825 S2H. The code stands for the following:
JF - fan type
08 - frame width - 80 mm
25 - frame thickness - 25 mm
S - sleeve bearing
2 - voltage - 24V
H - high speed (3,000 rpm I think)
Overall it puts out 38.39 CFM air flow. Input: 130 mA, 3.12 watts
I have found a direct replacement from Jaycar. Catalogue number YX2542.
80mm 24VDC Thin Ball Bearing Version - 2 Wire | Jaycar Electronics (https://www.jaycar.com.au/80mm-24vdc-thin-ball-bearing-version-2-wire/p/YX2542)
Air volume: 40 CFM
Input: 3.12 watts
Ball bearing
Input current: 130 mA
Size: 80 mm width, 25 mm thickness
Speed: 3200 rpm
It's only $30!
Edward :)