Traxide kit tangles

[landoman]

Bought a Traxide defender headlights upgrade kit
when I tried to unpack the orange brown black loom it got into a total tangled mess

Is there a way to to remove the wire holders from the plugs that go into the light socket fittings to undo the tangles

as there are 3 wires in the loom as I try untangle 1 the other 2 get further tangled

i know I'm going to be cutting it when fitting ....and this will get the tangles out but prefer to try to untangle it before I start installation

a few bits of tape on the loom could be a good QA upgrade to what otherwise looks like a good
product

[Vern]

The plugs should have a small tab on the back of them that holds them in place, ypu need to get a small screw driver and slide it in on the back side of the little plug to bend the tab in, it should just slide out then

[landoman]

The plugs should have a small tab on the back of them that holds them in place, ypu need to get a small screw driver and slide it in on the back side of the little plug to bend the tab in, it should just slide out then

Thanks Damien ........great got it .....all untangled now and ready to install .

[incisor]

geez

the poor bugger spends all that time putting the special twist in those cables so they don't give off too much RF and .........



[bigrolf]