PDA

View Full Version : Some suspension fault questions.



simpin68
5th October 2017, 05:31 PM
I just finished spending 2 days replacing the power steering bracken. (something I recommend nobody ever does)

Now I have the car back together I have a problem with the suspension. The car is sitting low and the compressor is not coming on at all. [emoji24] First guess is I have broken something.

The compressor was on its last legs and I was about to put a kit through it but now it is just not working at all.

Questions are:

Does the car stop the pump if it picks up fault somewhere?

What could I have damaged around left front suspension to break it?

If the pump just suddenly died , how can I test it?

Could it just need a reset? (Wishfull thinking)

veebs
5th October 2017, 05:32 PM
Do you have a diagnostic tool? (or access to one?)

simpin68
5th October 2017, 05:46 PM
Do you have a diagnostic tool? (or access to one?)Unfortunately I don't have one and don't know anybody with one. Except the machanic which us looking very attractive at this point

simpin68
5th October 2017, 06:07 PM
Update

Sorry, the pump is working. Just not getting any response from moving the suspension up or down.

veebs
5th October 2017, 06:25 PM
well, a hard reset couldn't hurt - take both leads off the battery, and connect together. Note, don't connect the battery terminals, just the leads.

Graeme
5th October 2017, 08:04 PM
well, a hard reset couldn't hurt - take both leads off the battery, and connect together. Note, don't connect the battery terminals, just the leads.
Unless a 2nd battery c/w Traxide controller is fitted....