4HP24 into RRC

[bikeman]

I noticed in a post that Gavin installed a 4hp24 into his LSE. My auto is on its way out and wondering what is involved with installing a later model gb into a 95Classic. I don’t want to go manual.
Phil

[fitzy]

There are two auto gearboxes fitted to rangie classics.
Chrysler torqueflight and zf hp 22.
The zf hp24 was fitted to p38’s and is roughly 24 mm overall longer , it’s a bit stronger than the 22.
I’m not sure how the extra length is dealt with .
Is the prop shaft shorter?
You should find more 22’s available than 24’s but if you already have one the why not.
Ashcroft Transmissions (http://www.ashcroft-transmissions.co.uk/automatic-gearboxes/zf4hp22.html)

[PhilipA]

Isn't the HP24as fitted to a 38A the EH version which is electronically controlled by a computer?

You could rebuild a 4hp22 as a 4hp24 but the driveshafts have to be changed as the 24 is longer than a 22. You could also run a stand alone computer to run it.
Ashcrofts can do this. Have a look at their site.
Regards Philip A

[350RRC]

There are two auto gearboxes fitted to rangie classics.
Chrysler torqueflight and zf hp 22.
The zf hp24 was fitted to p38’s and is roughly 24 mm overall longer , it’s a bit stronger than the 22.
I’m not sure how the extra length is dealt with .
Is the prop shaft shorter?
You should find more 22’s available than 24’s but if you already have one the why not.
Ashcroft Transmissions (http://www.ashcroft-transmissions.co.uk/automatic-gearboxes/zf4hp22.html)

And BW35's and Ford C4's and C9's in Oz.

DL

[fitzy]

Yeah yeah, you know I was talking factory[emoji57]
But correcto.

[bikeman]

I think I will look around for a hp22. I may build up a hp24

[blackrangie]

Call A & B automatics in Vic..they can do 22 with 24 internals

A & B Automotive Remanufacturing | A & B Automatics | Land Rover and Range Rover remanufactured automatic transmissions | A&B Automotive | Automatic Transmission Remanufacturing, Repairs and Exchange Australia (http://abautomatics.com.au/land-rover-and-range-rover/)

[RRCHEV]

A&P Automotive in Dandenong built me a full custom auto with upgraded internals to handle 550hp. I run an Ls chev & I did not want electrics (no computer). As I am in deep mud and water so electrics depletion was my agenda.
The HP/22-24 has not let me down at all. I am running 36" tyres and have around 180kw @ wheels.
Fuel is my only issue.....

And cleaning..

[superquag]

I noticed in a post that Gavin installed a 4hp24 into his LSE. My auto is on its way out and wondering what is involved with installing a later model gb into a 95Classic. I don’t want to go manual.
Phil

Not quite, the PO (East coast) did the installation, engine & gearbox and electrics/whatever - D2 was the donor vehicle.

IMHO, it's the drivetrain the LSE should have had as Original.