Check / Clear ABS on Discovery 2 TD5

[Mr.Ignacio]

Hi @ all!

After some time with the 3 Amigos, the Error became permament. Means that the ABS-light stays on after ignition check and then the HDC and TC lights come in addition. Now I made the „Option B“ and checked all 4 ABS-Sensors (1000Ohm).
Guess I have to clear the codes now (maybe hit the magic 256?!).
I‘m in Adelaide in the next few days and looking for a workshop recommendation or a member to check/clear the fault codes.

Tried two general workshops on the way but noone had the right interface to access the ABS

Any suggestions?

Thanks!
Jan

[djam1]

Try Peter Brown
PCB Independent Landrover Specialists - Servicing, Repairs, Modifications & Spare Parts (http://www.pcblandrovers.com.au/)

[donh54]

Never go to a "general" workshop for Land Rover problems! All they see is a nice, fat wallet walking in the door.

[Mr.Ignacio]

Ok I´ll try the PCB. What's a common price for the fault-clearing?

[Pedro_The_Swift]

a crisp handshake and discussion on each others cars,,, [wink11]

if you ask a fellow Aulroian to help,,
plenty on here with nanocoms
try asking in the D2 Forum...

[BigJon]

My scantool should clear the codes. Has worked on other D2s.

[Mr.Ignacio]

Maybe interesting for others: PCB charges 100$ to plug the interface in the Disco. Can't imagine that LR is more expensive?!

[johnp38]

Maybe interesting for others: PCB charges 100$ to plug the interface in the Disco. Can't imagine that LR is more expensive?!

It's $150 now