PDA

View Full Version : TD5 injector loom



pop058
16th April 2018, 08:00 PM
Chasing a source for the injector loom for a TD5. I am led to believe it is a service item. Any advice appreciated. tks

RobMichelle
16th April 2018, 08:46 PM
Try roverlord on here or any landrover place, prices vary a bit, consider injector washers and o rings whilst ya in there.

jonesfam
16th April 2018, 09:26 PM
There are some advertised on Ebay.

rangieman
16th April 2018, 10:01 PM
X2 For Mario .
Yeah they say a service item [bigwhistle] I got a newy about 3 years ago pulled it apart and used some wurth epoxy crap in all the plugs and hey presto not a sign of oil any where since [thumbsupbig]

donh54
16th April 2018, 10:27 PM
X3 for Mario [biggrin]

pop058
17th April 2018, 05:30 AM
Mario/Heather it is then, tks

Lemo
17th April 2018, 12:30 PM
Get a new gasket while you’re at it and the little rubber washers for each bolt

goanna_shire
17th April 2018, 06:47 PM
I got creative with a new harness and a soldering iron and stripped each wire and coated with solder before doing the epoxy trick. Stopped the oil creeping down inside the wires. (Did not solder all wires together)