Tie rod end

[Steven Sherwood]

Hi was wondering what do you do for tie rod end boots my boots are shot but the joints are still good any help appreciated

[DAMINK]

Hi was wondering what do you do for tie rod end boots my boots are shot but the joints are still good any help appreciated

If boots are gone i change the ends every time.

[p38arover]

Unfortunately, on the P38A, only one end of the track rod/drag link can be replaced. The other end is crimped in.

142583

[Bigbjorn]

Make a new rod out of a piece of 4140. Threads are 11/16 x 16 NS LH & RH

[TheTree]

I bought a universal pair which I am hoping to fit soon

ENERGY SUSPENSION Original Style Round Tie Rod End Dust Boot Set (Pair) 703639409731 | eBay (https://www.ebay.com.au/itm/ENERGY-SUSPENSION-Original-Style-Round-Tie-Rod-End-Dust-Boot-Set-Pair-/232856456530?oid=232812491751)

Otherwise it's a new tie rod end and/or tie rod [bighmmm]

Steve

[TheTree]

So I finally fitted these and they are working well so far, filled the ball ends with grease and put these babys on !

ENERGY SUSPENSION 9.13103G

Pin Taper Diameter 12mm, 0.472" or 31/64".
Socket Diameter 30.5mm, 1.200" or 1 13/64"

Much cheaper option than new tie rods [wink11]

Steve

144380

144381

144382