PhilipA
30th July 2018, 03:40 PM
Today I thought I would fill my washer bottle as the washers were not working.
However it was full.
I took off the hoses at the nozzles but still nothing .
Took off the hose at where it meets the bonnet and started the pump.
This yellow discoloured water came out with lots of lumps of black slime.
So I got my little ALDI pump and filled and pumped out the bottle about 20 times until I had clear water with no slime.
I also got the hose and blasted into it.
Then I blasted compressed air backwards through the nozzles , and forwards through the non return valves and backwards into the bottle .
I am damned if I know how or why it happened, as I always use demineralized water with a bit of washer detergent.
What a PITA, but for the moment they are working well.
If it happens again I guess I will have to take out the bottle which looks like a major job.
Regards Philip A
However it was full.
I took off the hoses at the nozzles but still nothing .
Took off the hose at where it meets the bonnet and started the pump.
This yellow discoloured water came out with lots of lumps of black slime.
So I got my little ALDI pump and filled and pumped out the bottle about 20 times until I had clear water with no slime.
I also got the hose and blasted into it.
Then I blasted compressed air backwards through the nozzles , and forwards through the non return valves and backwards into the bottle .
I am damned if I know how or why it happened, as I always use demineralized water with a bit of washer detergent.
What a PITA, but for the moment they are working well.
If it happens again I guess I will have to take out the bottle which looks like a major job.
Regards Philip A