View Full Version : Windscreen Wiper Arms
jdobson
14th August 2018, 09:05 AM
I am struggling to find the correct wiper arms and blades for my 1964 Series IIA. Can anyone recommend a supplier in Australia? So far I have only been able to find Series III ones and they are too long. For the avoidance of confusion - my Land Rover has two separate Lucas wiper motors and when in the parked position they should both face the passenger side.
Thanks
Cap
14th August 2018, 05:16 PM
Pretty much all my bits i bought for my 2a is from UK.... Craddock or Paddocks. Try them and usually from their web site not ebay
Loading...
5th September 2018, 09:51 AM
Have any luck finding any Jack?
I've been caught out with the too long arms as well, also with the fitting to the motor arm itself. My 2a has a threaded collar type fitting that attaches to the motor arm, only found these ones from charlieccu on eBay that might actually do the job
Stainless Steel Wiper Arm Eye Peg Fitting Land Rover Series 1 80 86 88 107 | eBay (https://www.ebay.com.au/itm/Stainless-Steel-Wiper-Arm-Eye-Peg-Fitting-Land-Rover-Series-1-80-86-88-107/272991825350'ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649)
danniboy
7th August 2020, 04:02 PM
I am struggling to find the correct wiper arms and blades for my 1964 Series IIA. Can anyone recommend a supplier in Australia? So far I have only been able to find Series III ones and they are too long. For the avoidance of confusion - my Land Rover has two separate Lucas wiper motors and when in the parked position they should both face the passenger side.
Thanks
Yes I had that problem with my 2A. I drilled the two little pop rivets and shortened the arm and then riveted it again.
I think the arms might have been series 3 ones.
1950landy
7th August 2020, 08:20 PM
I have not been to a swap meet for years , that is were i bought mine for my 80" off the guy's who supply for hot rods.
JDNSW
7th August 2020, 08:48 PM
There were several different arms fitted to Series 2 and 2a. My 2a parts book lists six different arms and three different blades and I suspect that there may have been even more fitted!
Johnno1969
8th August 2020, 05:21 PM
I am struggling to find the correct wiper arms and blades for my 1964 Series IIA. Can anyone recommend a supplier in Australia? So far I have only been able to find Series III ones and they are too long. For the avoidance of confusion - my Land Rover has two separate Lucas wiper motors and when in the parked position they should both face the passenger side.
Thanks
I found a UK supplier who might be useful. PM me if you want details.
John
Shane Scanlan
13th August 2020, 08:09 PM
Am I wrong in thinking what you want is on this page: Land Rover Parts - WINDSCREEN WIPER & WASHER - SERIES LAND ROVER (https://www.britishautoparts.com.au/windscreen_wiper___washer___series_land_rover)
I've had two order from this Bayswater, Victoria supplier and they have been very quick and thorough.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.