PDA

View Full Version : Tacho stopped working



Ean Austral
13th October 2018, 08:18 PM
Gday All,

1990 model 3.9 is the tacho run off the electrics somewhere ? . Started the car today and no tacho , was working a few days back and the oly thing I have done is remove the air con pipes that run across the fire wall.

Still learning to navigate the rave manual.

Thanks and Cheers Ean

Vern
13th October 2018, 08:20 PM
Wire on the back of the alternator.

Ean Austral
13th October 2018, 08:28 PM
Wire on the back of the alternator.

Ok thanks [thumbsupbig][thumbsupbig][thumbsupbig]

Cheers Ean

p38arover
13th October 2018, 09:04 PM
Yep, the W terminal which is off one phase of the stator. You may have a dead alternator or you've knocked the wire off when working.

DoubleChevron
13th October 2018, 11:50 PM
Don't worry, I'm sure it'll have fixed itself by the time you use the car again ................................ [bighmmm]

My tacho sometimes has a mind of its own. But it usually comes good after a short time.

bee utey
14th October 2018, 12:03 AM
A loose or wet belt on the alternator can do it too, slowing the alternator right down after the battery has been drawn down.