PDA

View Full Version : Lenny from Brunswick 1987



JB.
22nd October 2018, 10:45 AM
Picked up Lenny on Friday 19 Oct.



https://uploads.tapatalk-cdn.com/20181022/c63f81c0fe71a60cc72ede75c9d855ee.jpg

https://uploads.tapatalk-cdn.com/20181022/5e9d58468fd0bc6e06dd52c630ec23af.jpghttps://uploads.tapatalk-cdn.com/20181022/c2d5aa3b30a66e20586310d00b26b5a6.jpg

Gave it a good tidy up and checked to make sure everything works.

Fitted door locks

Fixed jammed heater controls
https://uploads.tapatalk-cdn.com/20181022/96884763d13d646f17366942a125a136.jpg


Fitted cargo barrier

https://uploads.tapatalk-cdn.com/20181022/2f4a2dc054ae080e08e105dc46fc3179.jpg
https://uploads.tapatalk-cdn.com/20181022/593bf8793b52f5887db2a29d584dcbbc.jpg

Cheers

JB

grey_ghost
22nd October 2018, 01:07 PM
Hi Mate,

Small world.... Guess what I took a Photo of at Dookie recently? As in - Saturday, October 13th...

This is your vehicle, correct?

https://i.imgur.com/l0sULUH.jpg

Cheers,
GG.

JB.
23rd October 2018, 08:06 AM
Hi Mate,

Small world.... Guess what I took a Photo of at Dookie recently? As in - Saturday, October 13th...

This is your vehicle, correct?

https://i.imgur.com/l0sULUH.jpg

Cheers,
GG.

It is a small world! What was going on in Dookie?

Cheers

JB

grey_ghost
23rd October 2018, 09:14 AM
Hi JB,

Each year Dookie (up near Shepparton) there is a Military Vehicle Display in October. There are all kinds of vehicles on display - Land Rovers, Jeeps, UniMogs, motor bikes, bicycle's, Hummers, etc.

Naturally because I like Land Rovers, I tend to look at them... And I thought that I recognised your Perentie..!

So you must have bought it just after the owner showed it?

Cheers,
GG.

JB.
24th October 2018, 06:57 PM
Hi JB,

Each year Dookie (up near Shepparton) there is a Military Vehicle Display in October. There are all kinds of vehicles on display - Land Rovers, Jeeps, UniMogs, motor bikes, bicycle's, Hummers, etc.

Naturally because I like Land Rovers, I tend to look at them... And I thought that I recognised your Perentie..!

So you must have bought it just after the owner showed it?

Cheers,
GG.

I’ll have to stick it in my diary for next year.

Cheers

JB

JB.
26th November 2018, 10:32 AM
A couple of upgrades to Lenny in the last few weeks.

I’m on the road!
https://uploads.tapatalk-cdn.com/20181126/cc2c8b53e4c460b2d4510ebe89d1a7ae.jpg

Dual (or triple) Batteries on a Redarc BCDC 1225. Anderson Plugs are for solar in and power out. Looking to put a fuse box nearby to distribute power to fridge, lights and future water pump.
https://uploads.tapatalk-cdn.com/20181126/466bce7685b55c3af999d2af5c8762cf.jpg

12v socket.
https://uploads.tapatalk-cdn.com/20181126/fab196cfead11927b2a99e785fdc5907.jpg

Paint test. (I like it, so more paint is on order)
https://uploads.tapatalk-cdn.com/20181126/a273866de508b391c349017d403c7b64.jpg

Back section of a truck cab test fitted
https://uploads.tapatalk-cdn.com/20181126/9f0fa9fd650e1b4277a3fb0ff6b4dd73.jpg
https://uploads.tapatalk-cdn.com/20181126/f6f979c7f03ff52d4f838849136bd06e.jpg
https://uploads.tapatalk-cdn.com/20181126/f9dd013c163c78c041727fab4ae4fe3c.jpghttps://uploads.tapatalk-cdn.com/20181126/eb19a799d1ca903088e108b8177af4c6.jpg

Removed the bullbar (it’s for sale if anybody wants it)
https://uploads.tapatalk-cdn.com/20181126/9b8612b24c165fbe25d2c394788839fe.jpg

I also installed a single Ute Drawer. This is half finished. I intend to install some form ply across the whole back over the top of this. So no good photos yet.

https://uploads.tapatalk-cdn.com/20181126/1244c06590aa164d0f03e89bbedcea93.jpg

I also removed all of the fittings from the bonnet and have ordered a bit of checker plate. I need to paint the bonnet before I install the checkerplate, so no photo yet.

Cheers


JB