View Full Version : Llams Not Working
rhinosm
24th October 2018, 07:05 PM
Hi Graeme
I recently had both front shockers/air bags replaced by LR and now my Llams doesn't work, but the LR height controls work.
Any suggestions as to what the problem may be.
Thanks
Vin
Graeme
24th October 2018, 08:38 PM
Has the red button been pressed? If the module LED is alternating red and green then press the red button once (more).
rhinosm
4th November 2018, 09:08 PM
No luck in finding problem.
I took car back to LR to have Sat Nav checked as GPS was not working.
They did a software update and now, hey presto, everything is working just great, including Llams.
Go figure.
kelvo
4th November 2018, 09:54 PM
Software update or ‘bugger we forgot to put that plug that back in better do it properly now’? [bighmmm]
discomatt69
6th November 2018, 07:41 AM
I know exactly what you problem was, LR paying an apprentice $18.88 / hour who had not much of a clue and he didn't do the job properly[bighmmm]
At least you made the dealer principle something for his 250k salary [thumbsupbig]
Zeros
6th November 2018, 07:48 AM
Such a common story with dealer servicing! I don’t think I’ve ever had a dealer service where I didn’t need to return to the dealer to hold them to account and fix a problem!
Graeme
6th November 2018, 08:03 AM
No luck in finding problem.
I took car back to LR to have Sat Nav checked as GPS was not working.
They did a software update and now, hey presto, everything is working just great, including Llams.
Go figure.
A possible explanation is that if the Llams module had been put into calibration mode but calibration not completed then the battery disconnected, the Llams module would have restarted normally when the battery was reconnected.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.