Exhaust made to rumble for 3.9 Disco on LPG

[lestraw]

Hi,
Just after any tips on extracting a better growl from my std exhaust , not really interested in power upgrade, just a better note. Any good brands people have experience with, so l won't sound like a complete novice at an exhaust shop.. Cheers Sam

[HSVRangie]

Single 2.5 inch exhaust.

1 2.5 inch full flow muffler
1 2.5 inch resonator.


slightly better sound is dual 2 inch exhaust.
2 2 inch full flow mufflers
2 2 inch resonatrors.


option 2 more $$$

fit extrators if you like add extra $400.00 pllus fitting.

Michael.

[rovercare]

twin 1 3/4", has a real bark to it, better than any single system, and is cheap as chips, twin 2" is probably a little big for a stock 3.9 and you'll lose some torque

[D110V8D]

Cut off about 500mm from the rear end.

Cost : 1 hacksaw blade.

Sound : Better than it was before. https://www.aulro.com/afvb/

Worked for me. https://www.aulro.com/afvb/ https://www.aulro.com/afvb/ https://www.aulro.com/afvb/ :wink:

[BigJon]

On my 3.5 Range Rover. Replace the centre muffler box with a straight through muffler, delete the rear resonator entirely and make the last 12 inches of pipe 2.5 inch. Sounds pretty deep and grunty. Now all I need is the power to match the noise...

[Grimace]

old rangie - Pacemaker extractors, 2.5" madrel bent, hiflow (full flow) muffler, exit pointing more downwards to the road.

current tow vehicle - exhaust chopped about 8 inches after main muffler (below rear door) https://www.aulro.com/afvb/ IT FELL OFF I SWEAR https://www.aulro.com/afvb/

[Pedro_The_Swift]

Originally posted by rovercare
twin 1 3/4", has a real bark to it, better than any single system, and is cheap as chips, twin 2" is probably a little big for a stock 3.9 and you'll lose some torque

Hi rovercare,,
any pics of the system???

[DeeJay]

If it's a great noise at little/no cost just get rid of the resonator- growly result... https://www.aulro.com/afvb/ https://www.aulro.com/afvb/

[LoadedDisco]

As far as I know there are no extractors made for the D2 unless you pay $2000.00 or more for customs, not work the cost.

Just fit a free flow muffler to the existing one and it makes a deeper growl and slight improvement.

[rovercare]

Originally posted by Pedro_The_Swift+--><div class='quotetop'>QUOTE(Pedro_The_Swift)</div><div class='quotemain'><!--QuoteBegin-rovercare
twin 1 3/4", has a real bark to it, better than any single system, and is cheap as chips, twin 2" is probably a little big for a stock 3.9 and you'll lose some torque

Hi rovercare,,
any pics of the system???[/b][/quote]

Sorry mate mine has twin 2 1/4" but that was on a 302 then turboed now soon to be 351 N/A, i just love the sound of twin systems, they have a much deeper note, but the rover motors sound grouse with twin 1 3/4", way better than having the same single system note as everyone else.

If only the went like they sound, they would pull wheelstands!!!!

[rovercare]

Originally posted by LoadedDisco
As far as I know there are no extractors made for the D2 unless you pay $2000.00 or more for customs, not work the cost.

Just fit a free flow muffler to the existing one and it makes a deeper growl and slight improvement.

2K for custom??? **** they'd wanna be some perfectly tuned length, stainless suckers for that price!!!!