View Full Version : Firewall spare holes, or are they used for something ?
JohnboyLandy
28th November 2018, 09:24 AM
When taking my 2a apart almost two years ago, I took lots of pictures of the drivers side, but I didn't pay much attention to the passenger side. Now I'm putting it back together, I'm struggling a bit to know what else goes on the drivers side apart from the chassis riser and the strut, so I would like to know of there's anything else that needs to attach, especially to the holes I have identified in the attached pic.
146400
Any help appreciated
Cheers,
John
LRJim
28th November 2018, 10:32 AM
I think they are for the LHD version, my s3 had some holes with gromits in them which match up to the drivers side throttle pedal, brake booster/clutch and steering box all had holes on the passenger side also.
Cheers Jim
goingbush
28th November 2018, 11:37 AM
Yes, they are throttle linkage for LHD models .
JDNSW
28th November 2018, 05:16 PM
As above. Fill them with blind grommets.
JohnboyLandy
28th November 2018, 07:26 PM
Yep, $1.45 ea at Clark Rubber, heading there tomorrow :-)
Cheers,
John
LRJim
28th November 2018, 07:44 PM
Yep, $1.45 ea at Clark Rubber, heading there tomorrow :-)
Cheers,
JohnBunnings sell them too if clarks hard to get to. In the special bolt section (the little packets) down the bottom normally along with red nylon washers which make great sump plug washers[emoji106]
bemm52
29th November 2018, 07:40 PM
If ya don't plug em this happens
146435 146436
Well not quiet you have a different set of holes ..........mud never sleeps[bigrolf]
Cheers Paul
JDNSW
30th November 2018, 06:05 AM
My experience is that carefully finding and plugging all the unused holes works wonders for cabin noise! As well as keeping the mud out.
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.