IndusD4
23rd December 2018, 07:56 PM
On the D5 you can set the car into tight tolerance mode manually should anyone need this.
The procedure is as follows:
Gearbox in Park
Start the engine
Set the suspension to Normal height
Open the drivers door
Press the brake pedal lightly 3 times letting the pedal come up fully each time
And close the door within 10 seconds from first press of the brake pedal.
There will be 2 chimes from the instrument cluster after the door is closed, if successful. Each time the door is opened and closed 2 chimes will sound indicating it is still in tight tolerance mode.
To deactivate:
Either turn the engine off, or drive it over 5mp/h (8km/h)
If you were to use this procedure for wheel alignment you need to have the engine running the whole time.
Ron
The procedure is as follows:
Gearbox in Park
Start the engine
Set the suspension to Normal height
Open the drivers door
Press the brake pedal lightly 3 times letting the pedal come up fully each time
And close the door within 10 seconds from first press of the brake pedal.
There will be 2 chimes from the instrument cluster after the door is closed, if successful. Each time the door is opened and closed 2 chimes will sound indicating it is still in tight tolerance mode.
To deactivate:
Either turn the engine off, or drive it over 5mp/h (8km/h)
If you were to use this procedure for wheel alignment you need to have the engine running the whole time.
Ron