PDA

View Full Version : Custom PIDs for Torque App - oil temp, oil level, trans temp, and more



Cambo_oldjaguar
1st February 2019, 05:02 PM
https://cimg8.ibsrv.net/gimg/www.jaguarforums.com-vbulletin/898x490/pids_overview_copy_ca69628bb8a432bde368bad7b2a43c8 b9d5a3fc0.jpg

If you have a 2010-onward Jag or Land Rover with the electronic oil level sensor, and are using Torque Pro App on Android, one of the members of our group has reverse engineered some useful PIDs so you can now see measurements on Torque of Engine Oil Level, Engine Oil Temperature, Transmission Fluid Temperature, E-Diff Fluid Temperature, and more.

Attached PDF file outlines the process for adding the custom PIDs to Torque Pro, you will need to download a .csv file, there is a link in the document to download the file.

This information/instruction is provided for free! Hope some people might find it helpful.

148050

shack
1st February 2019, 09:55 PM
https://cimg8.ibsrv.net/gimg/www.jaguarforums.com-vbulletin/898x490/pids_overview_copy_ca69628bb8a432bde368bad7b2a43c8 b9d5a3fc0.jpg

If you have a 2010-onward Jag or Land Rover with the electronic oil level sensor, and are using Torque Pro App on Android, one of the members of our group has reverse engineered some useful PIDs so you can now see measurements on Torque of Engine Oil Level, Engine Oil Temperature, Transmission Fluid Temperature, E-Diff Fluid Temperature, and more.

Attached PDF file outlines the process for adding the custom PIDs to Torque Pro, you will need to download a .csv file, there is a link in the document to download the file.

This information/instruction is provided for free! Hope some people might find it helpful.

148050Is it just me that the pdf/link is broken for?

Cambo_oldjaguar
1st February 2019, 09:57 PM
Just you?

https://uploads.tapatalk-cdn.com/20190201/df70dcf31d206443a704fda8bf2af05d.jpg

shack
1st February 2019, 09:57 PM
Just you?

https://uploads.tapatalk-cdn.com/20190201/df70dcf31d206443a704fda8bf2af05d.jpgI can't access any files from the post

Cambo_oldjaguar
1st February 2019, 10:01 PM
I can't access any files from the post

It's been downloaded 13 times from this page so far, so I don't know...

shack
1st February 2019, 10:05 PM
It's been downloaded 13 times from this page so far, so I don't know...Ok,I don't know what's going on then,I am on a phone though,

Will check again later,

Cheers

Edit:

Web browser fixed it thanks

AlExus
14th September 2020, 05:05 PM
Hi all,

Somewhat really useful info to observer (those parameters with the mentioned in the document PIDs).

I wonder if somebody saw any PIDs for Discovery Sport with 2.0 diesel engines?

Cheers,
Alex

shack
14th September 2020, 07:49 PM
Hi all,

Somewhat really useful info to observer (those parameters with the mentioned in the document PIDs).

I wonder if somebody saw any PIDs for Discovery Sport with 2.0 diesel engines?

Cheers,
AlexHi Alex,

There seem to be some much better options out there now from what I've been trialling.
If anyone is interested, and it's permissible of course, I'll post it.

Cheers
James

ardevd
1st April 2024, 04:40 AM
Hi Alex,

There seem to be some much better options out there now from what I've been trialling.
If anyone is interested, and it's permissible of course, I'll post it.

Cheers
James

I'm very interested in more info if you could share? PM?

DieselLSE
8th April 2024, 11:45 AM
Following Cambo's instructions, but I cannot locate the .torque/extendedpids folder anywhere (and yes, I've turned hidden folders on).
For example, a search of the phone for .torque produces:
189620
And after I've connected Torque to the OBD device it shows:
189621
In both cases further exploration of the directories provides no results.