Log in

View Full Version : Performance chip for dico 3 tdv6


Laurie 123
13th February 2019, 11:30 AM
Hi there ,Disco 3 tdv6.Can anyone tell me weather or not a performance chip is good or bad ?ie is it worth it or not ?
gofish
13th February 2019, 12:23 PM
I'd suggest a remap rather than a chip. Not cheap but worth it I find. A much nicer car to drive.
remoman
13th February 2019, 12:44 PM
I got a blue tune from these guys. Disco 4 2.7 2010.

Chip Tuning | ECU Remap | DPF Solution - Australia - Quantum Tuning (http://www.quantumtuning.com.au)/

Been very happy with it so far. EGR fixed.
Eric SDV6SE
13th February 2019, 03:27 PM
Roo Systems Tow and Economy ECU tune, 195kW and 650Nm on my D4 SDV6 SE.

Permagrin yet to be removed
SeanC
13th February 2019, 05:16 PM
I have a Bell Automotive Systems ecu re-map,
IIDTool Discovery(R) 2.7L TDV6 Remap – BAS Remaps, Powering the Landrover tuning world! (https://bellautoservices.co.uk/store/iidtool-discovery-2-7l-tdv6-remap/)
Worth the money and very quick and easy if you have a GAP IID Tool.

Have heard good things about Bluefin re-maps if you don’t have an IID Tool.
https://www.mybluefin.co.uk/search'make=17&fueltype=2&model=73&variant=212
scarry
13th February 2019, 07:54 PM
Mine is remapped,its great,and EGR blank at same time is the go.

Doesn't use any less or more fuel,but the extra torque and the better off the mark acceleration is great.

But SWMBO seems to have worn the brakes out quickly[bawl][bigrolf]

Mine was done at MR auto,i don't know where it originated,maybe BAS?
Matty_P
14th February 2019, 08:04 PM
Mine is remapped,its great,and EGR blank at same time is the go.

Doesn't use any less or more fuel,but the extra torque and the better off the mark acceleration is great.

But SWMBO seems to have worn the brakes out quickly[bawl][bigrolf]

Mine was done at MR auto,i don't know where it originated,maybe BAS?


How much for the remap and EGR delete?
scarry
14th February 2019, 08:50 PM
How much for the remap and EGR delete?

It was a while ago,i am guessing around $1200 to 1400 approx.

Had plates fitted as well,to be sure the EGR's are shut.

Thats the only way to be 100% sure that they are completely blanked off.

Pretty easy to do.
Eric SDV6SE
14th February 2019, 11:17 PM
It was a while ago,i am guessing around $1200 to 1400 approx.

Had plates fitted as well,to be sure the EGR's are shut.

Thats the only way to be 100% sure that they are completely blanked off.

Pretty easy to do.

Cost sounds about right Scarry, just not sure if blanking plates can be fitted to the 3.0l sequential turbo engine egr valves as opposed to the single turbo 2.7’s...

someone on here with more tech experience on this may be able to clarify