Stickers

[DRanged]

Is it just me realising why I am a fitter & turner and not a sign writer or has any one else found the GCLRO stickers interesting to put on your vehicle??? Am I just getting old.

Regards Justin[/img]

[dungarover]

Yep I have. There a bit 'delecate' and for a rough bastard like me and that's not a good thing https://www.aulro.com/afvb/

Shouldn't whinge, I'm not a member yet til I pay and Josh gave me a couple, thanks.

Trav

[LoadedDisco]

I think these are the thinnest stickers I have ever seen or used.

To put them on you must just peal off the top say 5mm to 10mm of sticker straight across the top.
Stick the top part of the sticker on the window and then slowly peel down the backing carefully rubbing on the sticker towards where you are peeling it from. Take it slowly, and make sure you clean the surface and it is dry before putting it on.

[NOZ]

Mine is on but it looks a lot like the shape of a boomerang. Great design but the quality is a bit suss.

[stevo68]

No Dranged it aint you, after the meeting the other night I spent 10 minutes and all I was getting was paper back, then finally I got the sticky part, got it on but it is very delicate, would be best to start to peel put on spot and the slowly peel off the paper.

Regards

Stevo

[drivesafe]

I have yet to put mine on yet but I did a fair bit of pin striping in my youth.

Get a container and put some LUKE warm water in it and then put one or two drips of washing up detergent in the water.

Swirl it around and then put your pointer finger and thumb in it and rub them together while in the water.

If they feel slippery then you have enough soap in the water.

If they still feel rough then add another drip or two till you get it right.

DO NOT put too much soap in or when the sticker dries, it will peal off again.

Make sure the window is clean. A good way to clean any window is with a soapy steel wool pad and NO it won’t scratch the glass but it will remove just about everything that sticks to glass.

Peel the back off the sticker and put it in the soapy water. If the soap content is correct, the sticker once wet will not stick to your fingers.

Wet the glass with some of the soapy water and then place the sticker on the window and slide it around till you have it in the position you want.

Now get a clean face washer and roll it over the sticker. Because the sticker is so thin, do not wipe the sticker.

You can pat it but rolling the washer over the sticker will force the water out and absorb it at the same time.

That’s it, oh and when this does not work, don’t call me, I’m not home.

[Steinzy]

I had fun as well!!!! :evil:

now I have this annoying crease through the middle of the damn sticker :oops:

[stevo68]

<div class='quotetop'>QUOTE</div><div class='quotemain'>now I have this annoying crease through the middle of the damn sticker
_________________
[/b][/quote]


Me too :wink:

Regards

Stevo

[LoadedDisco]

I got it on the first go as described above with no defections, but Drivesafe's method it also a very good idea.

[Outlaw]

Hmmmm so what you're saying is that i went overboard with creating stickers that will last around 5-10 years AND should have included instructions of how to put on https://www.aulro.com/afvb/

Woops.

Thanks Drivesafe, you saved me having to type up the instructions... that is the perfect way to do it... guess you can all tell i don't usually put stickers on and the only experience i have had is with vehicle wraps (a vehicle with a picture that covers the whole thing) 8O

Sorry guys... and good luck. Also if having real problems, let me know and we can put on at the next outing.

[drivesafe]

Hi Outlaw, as I posted, I did a little work with stickers years ago.

BTW, as we drove along side the freeway yesterday, we called you on our CBs trying to warn you not to go on to the M1 because of the traffic jam and that we could get you around it if you followed us.

It wasn’t untill you were on the entry ramp that we remembered you didn’t have your CB with you. :oops:

How long did it take you to get passed the road works.

I bet we could have been in Brisbane by the time you would have got to Mudgeeraba.

Cheers.

[bolts]

Stickers are great but like most people the 1st one was a throw away, got the second 1 right and looks good. https://www.aulro.com/afvb/

Outlaw please could i get my Bolts CH33 sticker off you as discussed yesterday(Sunday) at old coach rd.

Cheers
Bolts

[Outlaw]

took a few minutes to get to the servo to grab some fuel... then started moving again not far past the servo... had 1 lane closed which is always good :wink:

And new uhf handhelds should be turning up today... nothing like timing right? But will be good for boonah https://www.aulro.com/afvb/

[FenianEel]

Where&#39;s my sticker then https://www.aulro.com/afvb/ https://www.aulro.com/afvb/

[Steinzy]

<div class='quotetop'>QUOTE(FenianEel &#064; May 14 2006, 01&#58;46 PM) Quoted post</div><div class='quotemain'>
Where&#39;s my sticker then https://www.aulro.com/afvb/ https://www.aulro.com/afvb/
[/b][/quote]

See what happens when you don&#39;t attend a meeting https://www.aulro.com/afvb/

[FenianEel]

See what happens when you don't attend a meeting

Hey, good to finally get to a GCLRO meeting at last.
Thanks for the ride Geoff too.

Sticker on! WOOHOO!

https://www.aulro.com/afvb/images/imported/2006/06/150.jpg

[WhiteD3]

Guys,

How do I go about getting some GCLRO stickers?

Cheers.

[stikman]

Guys,

How do I go about getting some GCLRO stickers?

Cheers.

Good Luck :o (Hey Josh :p)

Put me down for one also Josh :wasntme:

PS. Personal Joke between me and Josh WhiteD3. Will see what we can do.

[djhampson]

Stickers? Yes Please! :D

[stevo68]

Yeah wouldnt mind a new one myself, the old one is looking a little tired and tattered. I do have one somewhere, but for the life of me wouldnt have a clue,

Regards

Stevo

[dungarover]

Still got my spare one, but that's going on Project tight a*se when it's all registerd and going.

Still would like a spare all the same please :)

Trav