NANOCOM - Recording Live Data

[W&KO]

Hi

I need to get some performance figures to send off......

TD5 Defender with a MSB ECU and I have a NANOCOM


From what I understand I need to

Instrument/Dashboard
Click on Floppy Disc Icon Bottom right hand corner
Let engine idle to 30sec
Drive it up to redline in 2nd and 3rd gears

Q. how do I save/turn off recording? or do I simply just turn the car off
Q. how to I get the file? as I assume I have to read it or send it off.


I have sent an email to England but figured a member might be able to enlighten me so I can have a play tonight.


Thanks

[bsperka]

IIRC Click on the disc icon and give the file a name and click ok. When you want to finish recording click on the icon again.

[W&KO]

IIRC Click on the disc icon and give the file a name and click ok. When you want to finish recording click on the icon again.

Cheers.....

[sierrafery]

The recording is in "Inputs fuelling"... no need to save if the recording started once you turn it off and unplug it the file is saved then insert the SD card into the PC's slot and save it ... if you dont have the CSV viewer installed you'll have to import it to blank excell and select ; at "delimited" and finish to see it well

[W&KO]

The recording is in "Inputs fuelling"... no need to save if the recording started once you turn it off and unplug it the file is saved then insert the SD card into the PC's slot and save it ... if you dont have the CSV viewer installed you'll have to import it to blank excell and select ; at "delimited" and finish to see it well


Thanks, I have no interest in reading the file. I not sure why they want the info given the chip is being replaced.