SaltyNalty
24th August 2019, 10:24 PM
On our recent family holiday to Shark Bay we were involved in a head on collision with a Pajero Sport.
We were heading to Big Lagoon Camp Area in Francois Peron NP, WA.
We came across a Pajero Sport moving very quickly. The Pajero had highway tyres at road pressures. Witnesses said they had seen the Pajero driving very slowly and then accelerating to dangerous speeds. The Pajero was a hire car and the occupants were on holidays from overseas. They had no idea how to drive off-road let alone on the sand. Anyway, we collected them on a blind corner.
My car had it's right wheels in the left-most tyre track and the left side of the car off the track when we collided. The Pajero swerved into my car, probably a reflex as the Chinese drive on the right side of the road. There were no injuries.
https://live.staticflickr.com/65535/48611661092_9a6190e4a3_c.jpg (https://flic.kr/p/2h4DteN)
The Pajero Sport. After the accident, one of the cars helping us out dragged it off the track with a snatch strap. A tow truck was called as it couldn't be driven anywhere.
https://live.staticflickr.com/65535/48611149253_53737ff188_c.jpg (https://flic.kr/p/2h4AR5Z)
After I assessed the damage I moved my car back off the Pajero as it was leaking fluid into the front of the Discovery. The ARB steel bar had done an awesome job. The damage to my car was no where near as bad as I thought it would be.
https://live.staticflickr.com/65535/48611505956_d2b8804768_c.jpg (https://flic.kr/p/2h4CF83)
While the lens was broken all globes were still functional.
At the crash site we used my winch connected to a snatch block on another car and back to my bull bar to pull it forward off the front tyre. We had to connect it to different places to get the bar to bend back, all the while being careful not to break the bull bar mounts.
When the car was running you could hear leaking air. We traced it to a crushed airline between the control module and the right front suspension bag. One of the guys helping out had some self amalgamating tape so wrapped some around the damage to make it air tight again.
With those repairs we were able to drive again. It was only a couple of km to get to camp and about 17km to the nearest town, Denham. It was coming up to dinner time so we made the call to continue to camp and sort out the damage in the morning.
On the drive to camp the air line repair was whistling. At first the compressor could keep the air up but gradually we lowered to the bump stops. This threw an error and all programs were disabled. We hit a spot of soft sand and bogged down. The combination of soft sand and the 2t camper trailer on the back proved too much for the car without any programs. A nice bloke named John who helped out at the accident offered to tow us in to camp. So we connected my snatch strap and with a little encouragement through the soft sections we limped in to camp on the bump stops.
The next morning I used the high lift jack to force the bull bar further forward off the tyre. I also used a hack saw to trim the damaged wheel arch lining which was destroyed and rubbing on the tyre. The bracket that the air suspension control module counts to was destroyed as was the ARB wings for the bar.
I attempted to shore up the air line repair by placing back to back cable ties along the self amalgamating tape. This almost worked but no matter what I did it still leaked a little. It was also delicate. If you knocked it, it would leak more. I had a good think about the problem and came up with a new solution. It would mean cutting the line, so if it didn't work there would be no repairing it.
https://live.staticflickr.com/65535/48611505336_55d10e1943_c.jpg (https://flic.kr/p/2h4CEWm)
I cut the damaged section out. I then cut a piece of my Thumper air compressor line. Using two hose clamps off a dual inflation rig I had made up. I grafted the new section in. If was tricky as the damaged section was hard to get to.
https://live.staticflickr.com/65535/48611148603_a3318364ea_c.jpg (https://flic.kr/p/2h4AQTM)
I started up the car and jacked it up to off-road height and it held. I trimmed as much of the damaged panels in the wheel arch as I could and we were back in business.
https://live.staticflickr.com/65535/48611660367_7dce1079f0_c.jpg (https://flic.kr/p/2h4Dt2i)
A few more cable ties and we were able to continue our holiday. Many thanks to the ARB bar!
https://live.staticflickr.com/65535/48611660537_1b44a9d255_c.jpg (https://flic.kr/p/2h4Dt5e)
https://live.staticflickr.com/65535/48611660662_50c58ec816_c.jpg (https://flic.kr/p/2h4Dt7o)
https://youtu.be/_eo7rtJe3Dw Video here.
Cheers,
Salty
We were heading to Big Lagoon Camp Area in Francois Peron NP, WA.
We came across a Pajero Sport moving very quickly. The Pajero had highway tyres at road pressures. Witnesses said they had seen the Pajero driving very slowly and then accelerating to dangerous speeds. The Pajero was a hire car and the occupants were on holidays from overseas. They had no idea how to drive off-road let alone on the sand. Anyway, we collected them on a blind corner.
My car had it's right wheels in the left-most tyre track and the left side of the car off the track when we collided. The Pajero swerved into my car, probably a reflex as the Chinese drive on the right side of the road. There were no injuries.
https://live.staticflickr.com/65535/48611661092_9a6190e4a3_c.jpg (https://flic.kr/p/2h4DteN)
The Pajero Sport. After the accident, one of the cars helping us out dragged it off the track with a snatch strap. A tow truck was called as it couldn't be driven anywhere.
https://live.staticflickr.com/65535/48611149253_53737ff188_c.jpg (https://flic.kr/p/2h4AR5Z)
After I assessed the damage I moved my car back off the Pajero as it was leaking fluid into the front of the Discovery. The ARB steel bar had done an awesome job. The damage to my car was no where near as bad as I thought it would be.
https://live.staticflickr.com/65535/48611505956_d2b8804768_c.jpg (https://flic.kr/p/2h4CF83)
While the lens was broken all globes were still functional.
At the crash site we used my winch connected to a snatch block on another car and back to my bull bar to pull it forward off the front tyre. We had to connect it to different places to get the bar to bend back, all the while being careful not to break the bull bar mounts.
When the car was running you could hear leaking air. We traced it to a crushed airline between the control module and the right front suspension bag. One of the guys helping out had some self amalgamating tape so wrapped some around the damage to make it air tight again.
With those repairs we were able to drive again. It was only a couple of km to get to camp and about 17km to the nearest town, Denham. It was coming up to dinner time so we made the call to continue to camp and sort out the damage in the morning.
On the drive to camp the air line repair was whistling. At first the compressor could keep the air up but gradually we lowered to the bump stops. This threw an error and all programs were disabled. We hit a spot of soft sand and bogged down. The combination of soft sand and the 2t camper trailer on the back proved too much for the car without any programs. A nice bloke named John who helped out at the accident offered to tow us in to camp. So we connected my snatch strap and with a little encouragement through the soft sections we limped in to camp on the bump stops.
The next morning I used the high lift jack to force the bull bar further forward off the tyre. I also used a hack saw to trim the damaged wheel arch lining which was destroyed and rubbing on the tyre. The bracket that the air suspension control module counts to was destroyed as was the ARB wings for the bar.
I attempted to shore up the air line repair by placing back to back cable ties along the self amalgamating tape. This almost worked but no matter what I did it still leaked a little. It was also delicate. If you knocked it, it would leak more. I had a good think about the problem and came up with a new solution. It would mean cutting the line, so if it didn't work there would be no repairing it.
https://live.staticflickr.com/65535/48611505336_55d10e1943_c.jpg (https://flic.kr/p/2h4CEWm)
I cut the damaged section out. I then cut a piece of my Thumper air compressor line. Using two hose clamps off a dual inflation rig I had made up. I grafted the new section in. If was tricky as the damaged section was hard to get to.
https://live.staticflickr.com/65535/48611148603_a3318364ea_c.jpg (https://flic.kr/p/2h4AQTM)
I started up the car and jacked it up to off-road height and it held. I trimmed as much of the damaged panels in the wheel arch as I could and we were back in business.
https://live.staticflickr.com/65535/48611660367_7dce1079f0_c.jpg (https://flic.kr/p/2h4Dt2i)
A few more cable ties and we were able to continue our holiday. Many thanks to the ARB bar!
https://live.staticflickr.com/65535/48611660537_1b44a9d255_c.jpg (https://flic.kr/p/2h4Dt5e)
https://live.staticflickr.com/65535/48611660662_50c58ec816_c.jpg (https://flic.kr/p/2h4Dt7o)
https://youtu.be/_eo7rtJe3Dw Video here.
Cheers,
Salty