RHS Air Intake Grille Fitment

[Salinger]

I’ve had to replace the RHS air intake grille on my Puma 90.
It’s the engine air intake grille, the one normally replaced by a snorkel when fitted.

I’ve sourced a second hand grille but can’t see a way to attach it to the panel. There are holes in the panel and little poles on the grille, but no clips or doohickeys were supplied with the grille.

Any ideas where I can find out which bits I need and where I could source them from? The alternative is double sided tape, I guess? Any advice welcome!

Thanks.

[Dervish]

That's all there is, the holes should grip the poles; double sided tape is probably a good idea though.

[DazzaTD5]

Yes it just pushes in.
The little poles are prone to breaking off though and I have seen where owners drill out where the poles were and use nice finished screws to screw it in place.