PDA

View Full Version : Fancy shmancy induction system ?



yumastepside
15th September 2019, 09:29 AM
A couple of months ago I started working for what is basically a sheetmetal shop, ( I'm a heavy fabrication welder and I do the "heavier guage " jobs for them ) so I've decided to make a fancy stainless/aluminium induction set-up for the Rangie. I have changed the standard twin Stromberg set-up for a new intake manifold with a Holley and at this point have no air cleaner/snorkel or any type of intake at all....yet.
....so what I'm looking for is some pics or ideas for a fancy, you-beaut, hi-tech intake system....

Roger

aussearcher
15th September 2019, 12:47 PM
Have a look at webcon.co.uk
Amnd if you do make something, post some pics, as I'm thinking of doing something similar.

Slunnie
15th September 2019, 12:56 PM
Thats a tough one, all of the really cool induction systems have a different port layout to the Rover V8.

Bigbjorn
15th September 2019, 02:21 PM
Sounds like you are intending an outside cool air intake system taking outside air through an air cleaner to the carb. Have a look at the fresh air intake on a CM Valiant. Maybe even use the top of a CM air cleaner with a newly fabricated base plate to fit the Holley. Possibly plumb it back to the plenum chamber in the firewall.

Mercguy
15th September 2019, 07:40 PM
https://danstengineering.co.uk/index.php?route=product/product&product_id=158

Rover V8 CrossOver Inlet Manifold (http://www.thewedgeshopstore.com/rover-v8-crossover-inlet-manifold/)

or

Lloyd Dual-Plane Intake Manifold - Lloyd Specialist Developments LtdLloyd Specialist Developments Ltd (https://www.lloydspecialistdevelopments.co.uk/products-upgrades/rover-v8-engine-tuning/lloyd-dual-plane-intake-manifold/)

That's induction...... ;)

yumastepside
15th September 2019, 11:02 PM
Thanks for the replies, but I've got the carb and manifold, what I'm looking for is the fancy air filter cover and pipework to a snorkel type set-up.

Roger

Mercguy
15th September 2019, 11:12 PM
You'll need the holley efi carb hat and then you're going to need something like a D1 airbox and mod a D1 snorkel or similar.

You will need to fab /purchase your own ductwork.

Air Cleaners - Holley Performance Products (https://www.holley.com/products/fuel_systems/air_cleaners/page=2)