corroless rust stabilizer primer (S1)

[itolond]

Hi AULRO,

anyone can advise where I may get a 1ltr time corroless S primer from in OZ (pre in tasmania but anywhere will do)

[John_D4]

When j googled your product this is the 1st link. There is a ‘where to buy’ link which I’ve included also. Try putting in your post code and phoning each number in turn

Corrofix™ Rust Converter | Chemtools(R) Australia (http://www.chemtools.com.au/product/welding-chemicals/welding-chemicals-sub/corrofix-rust-converter/)

Locate Distributors | Chemtools(R) Australia (http://www.chemtools.com.au/find/)

[itolond]

When j googled your product this is the 1st link. There is a ‘where to buy’ link which I’ve included also. Try putting in your post code and phoning each number in turn

Corrofix™ Rust Converter | Chemtools(R) Australia (http://www.chemtools.com.au/product/welding-chemicals/welding-chemicals-sub/corrofix-rust-converter/)

Locate Distributors | Chemtools(R) Australia (http://www.chemtools.com.au/find/)


Corrofix is a converter - corroless is a stabiliser primer

i have made a fe calls with little luck thus far

[John_D4]

My bad. Sorry, I must have misread. Don’t suppose it’s made by the same company is it?

[Bigbjorn]

A google search reveals hundreds of hits for Corroless. I used it and Rustlac for preventative rust treatments on anything from sheet metal to bits of ship. They combination is good for unit construction vehicles. Holes into sub-frames and an engine cleaning gun to flood in the preventer. Then use plugs to keep the moisture out. Corroless, Rustlac, Tectyl are good for stopping rust in LR chassis.

[itolond]

A google search reveals hundreds of hits for Corroless. I used it and Rustlac for preventative rust treatments on anything from sheet metal to bits of ship. They combination is good for unit construction vehicles. Holes into sub-frames and an engine cleaning gun to flood in the preventer. Then use plugs to keep the moisture out. Corroless, Rustlac, Tectyl are good for stopping rust in LR chassis.

Gotcha, I only know of corroless but any air dry primer would work ...i am guessing rustlac is similar?

[RANDLOVER]

I thought primer paint doesn't actually stop rust, as a mate of mine learnt when he sanded and primed his VW Combi van IIRC, but took too long to paint it and it started rusting again. Although as
Bigbjorn says, if holes are plugged to keep out moisture, pro'ly okay.

[DiscoMick]

Rust converter isn't a paint, its an acid which converts rust.
Paint with rust converter has a bit of converter in the paint.
I don't know about that brand, but Bunnings has other brands which I have used.

[BMKal]

I have had great success with Metalfix primers made by Phoenix Paint in WA.