TD6 2002 A/C Final stage resistor

[BRUMMY]

Hi Guys
My A/c / Heater blower has stopped working. Have been online and most people point to the final stage resistor.
I can hear the compressor when i turn the a/c switch on.
Has any one on this forum had any experience with this problem.
Cheers Paul.

[p38arover]

Does the fan work in any switch position?

[BRUMMY]

No Ron. All the lights come on, but no fan.

[BRUMMY]

No Ron. All the lights come on, but no fan.
Fitted the new resister and everything back to normal.

[p38arover]

Are they hard to fit?

[BRUMMY]

I found a how to do on Youtube.Its under the right hand side of the dash, on the side of the fan housing.
The connector plug would not come off, so had to pull the resistor out and then get the plug off.
Its awkward as its in a very confined place.
The resistor cost $80.

[Roverlord off road spares]

Are they hard to fit?

Not hard to fit but hard to get to , need to be a contortionist though

[BRUMMY]

Yes you have to be flexable and not need any skin on your knuckles.....
Will need to buy a fault finder, any one out there used the Icarsoft LR V2.0, have heard good things about them.
$228 in Australia.
Cheers Paul.

[jsp]

Yes you have to be flexable and not need any skin on your knuckles.....
Will need to buy a fault finder, any one out there used the Icarsoft LR V2.0, have heard good things about them.
$228 in Australia.
Cheers Paul.

yeah they are OK