Infotainment hood for D4

[BrianElloy]

Hi peeps - I recall reading / seeing something in a 3D printer infotainment screen hood that someone (used to) produce

Anyone have any info on that? Keen to get the specs for my son so he can knock it up.

Happy to buy if available..

[cjc_td5]

Hi peeps - I recall reading / seeing something in a 3D printer infotainment screen hood that someone (used to) produce

Anyone have any info on that? Keen to get the specs for my son so he can knock it up.

Happy to buy if available..Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.

[BrianElloy]

Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.

Mate that would be awesome

My son has a Prusa printer. I’ll PM you my email address

[WALRDS]

Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.Would it be possibly to also grab the file, I've been searching through the threads seeing if anyone had it.

Thanks

[LRD414]

Yes that was me.
I still have one Chris made for me 3 years ago and was only thinking the other day how good it is.

Scott

[cjc_td5]

I am happy to provide the STL file on the proviso that it is not used for commercial use or for profit. I am away from home until mid next week. Drop me a PM with an email address and I will deal with it when I get back.
Cheers,
Chris.

[sctsprin]

I’d love a copy of this file

Thanks
James


Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.

[Chops]

I still have one Chris made for me 3 years ago and was only thinking the other day how good it is.

Scott


X2,, awesome bit of work.
I did nothing to mine, and it holds my little walrus I’ve been given by Digger Jnr.

[gavinwibrow]

Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.


If perchance you are still in the market to supply, I'd be very interested in one. Pity the printer is out of action, cos I'll be down just after next weekend.

[cjc_td5]

If perchance you are still in the market to supply, I'd be very interested in one. Pity the printer is out of action, cos I'll be down just after next weekend.My initial run a couple of years ago was done in ABS plastic that while easy to print with, is prone to warping during cooling. I had been experimenting with PETG which was being problematic such that the printer has been in purgatory for 6 months. Time for another crack at it, or go back to the ABS. I'll keep you posted.

[sctsprin]

I can print in high temperature co polymer black or white. Or pla in various colours


My initial run a couple of years ago was done in ABS plastic that while easy to print with, is prone to warping during cooling. I had been experimenting with PETG which was being problematic such that the printer has been in purgatory for 6 months. Time for another crack at it, or go back to the ABS. I'll keep you posted.

[Milton477]

Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.

I'd love a copy too. One of my sons should (I hope) be able to print for me.

[DiscoJeffster]

Same. Friends with 3D printers [emoji106]

[BrianElloy]

I am happy to provide the STL file on the proviso that it is not used for commercial use or for profit. I am away from home until mid next week. Drop me a PM with an email address and I will deal with it when I get back.
Cheers,
Chris.

Hey Chris - I PM’d you with my email address mate. Got an eta on the file? Will not be used for any commercial gain.

Thanks in advance

[PeterJ]

Is there a picture of it available.....thanks

[cjc_td5]

Hey Chris - I PM’d you with my email address mate. Got an eta on the file? Will not be used for any commercial gain.

Thanks in advanceI'll be home on Wednesday and have access to it then.
Chris

[cjc_td5]

Is there a picture of it available.....thanksThere are a couple of photos in this thread.
cjc_td5, D4 Shroud shout out. (https://www.aulro.com/afvb/l319-discovery-3-and-4-a/247889-cjc_td5-d4-shroud-shout-out.html)

Or search my "Lance" thread.

[PeterJ]

There are a couple of photos in this thread.
cjc_td5, D4 Shroud shout out. (https://www.aulro.com/afvb/l319-discovery-3-and-4-a/247889-cjc_td5-d4-shroud-shout-out.html)

Or search my "Lance" thread.

Thanks Chris, I will pm you as well, same as above, looks like a winner and it's just for my car, thanks again.

Peter

[Fasn8n]

Anyone willing to make an extra one for me please?

Don't have access to a printer and really keen on one.

Happy to pay reasonable costs [emoji16]

[glttce]

I would also be interested in getting one made if there were any hoods going as I don't have access to a 3D printer either.

[Redrex]

If be keen for the STL too, for once off use for my own.

Cheers