110 County and D1 interchangeable parts

[jakethrossell]

Hey ladies and gents.

I’ve recently gotten my hands on a d1 as I was after the front axle casing to change out with mine as it has cracked.

I’m looking to take the steering box out of the disco also as mine has developed a leak.

Are there any other usable parts on the D1 to suit?
With all this down time I’m looking at doing a rear disk conversion on my sails and want to grab what I can from the Disco before it gets put into a hole in the ground.

Cheers,
Jake

[rar110]

Shame you are so far away, as I need some plastic trim bits.

You can use the D1 steel wheels, R380 gearbox and transfer (prob slightly different ratio), and some have used the D1 handbreak lever in a 110 to place it in a better position.

[jakethrossell]

Shame you are so far away, as I need some plastic trim bits.

You can use the D1 steel wheels, R380 gearbox and transfer (prob slightly different ratio), and some have used the D1 handbreak lever in a 110 to place it in a better position.

Thanks for getting back to me.
I’ve got the LT95 in my rig so won’t use the box or any other components.
If you send me a list of what plastic trims you need I could always just throw it in an airbag and send it next time I head into Cooktown?
Just pay for postage and they’re yours

[Bearman]

Jake, you can use the D1 handbrake lever in the 110. Mount it just to the left of the drivers seat and you can take the left leg bruiser one out. The D1 ps box is interchangeable.

[jakethrossell]

Thanks Brian.
Might just take the 4bolt box and axle casing and leave it out here Incase some d1 or 300tdi comes unstuck up the cape... if they open it this year